FOLLOW

Faculty Achievements


S.No Name and Description Photograph
1 Digital storage oscilloscope

A general purpose test equipment used for visual inspection of various signals, their Storage and analysis in digital format. Its highest capture rate exceeds 1000 times/sec with a USB host (Pen drive) & Device Interface.
2 Signal Generator

A general purpose electronic test equipment used to generate different types of electrical signals like Sine, Triangular, Square over a wide range of frequencies. It is pivotal in development, testing & analysis of almost every electronic based experiment.
3. Modular instrumentation trainer

Modular instrumentation trainer to provide in-depth knowledge about the sensors and instruments. Abs Stability Drift not more than ? 0.005 Abs / hour after 1hr. of warm up time Linearity Better than 1% Noise
4. Microwave Antenna Experimental Setup

A complete training setup to provide hands on practical demonstration of working of a Microwave Antenna. It has a set of 15 Antennas like Horn, Slot, Helix, Dipole, Monopole, Aperture, Micro-Strip with a PLL Transmitter and Receiver. It offers study of Gain, Beam Width, Element Current and front-back ratio for examining the effect of size, shape and pattern of antenna for microwave transmission and reception.
5. Satellite Communication Link Setup

A satellite communication platform that provides an in-depth study of the basic satellite communication system with selectable frequency conversion. It is capable of transmitting audio, video signal, digital data, PC data and function generator waveforms. It allows emulation of signal fading with added attributes like: variable thermal noise, propagation delay, path loss for C/N and S/N ratio measurement.
6. Spectrum analyzer

It offers the ability to measure the spectral composition of RF or acoustic waveforms with reduced noise levels. It is pivotal in examining and measuring the power of known as well as unknown signals with a very low frequency discrimination of 100Hz. With a frequency range of 9 KHz to 1.5 GHz, it provides easier signal identification with Minimum Resolution Bandwidth (RBW) of 10 MHz
7. DSB/SSB AM Transmitter Experimental Set

A comprehensive learning solution designed to study and provide conceptual understanding of DSB/SSB Amplitude modulation and transmission system through measurement of voltages and observation of waveforms at various test points.
8. DSB/SSB AM Receiver Experimental Setup

It is a comprehensive learning solution designed to study basic operation of a super heterodyne receiver and DSB/SSB Amplitude demodulation system through measurement of voltages and observation of waveforms at various test points.
9. Frequency Modulation & Demodulation Set

A Lab training solution to study concept of frequency modulation & demodulation. FM modulation is implemented via two types of modulators: Varactor / reactance, and Demodulation via 5 types of demodulators: Detuned Resonant / Ratio / Quadrature / Foster - Seeley / Phase locked loop detector. It gives a visual display of the various waveforms involved in the process.
10. TDM Pulse Amplitude Modulation/Demodulation Experiment Set

A communication system where more than one input message signal is modulated using Pulse Amplitude Modulation and multiplexed using Time Division Multiplexing. The message information is encoded in the amplitude of a series of signal pulses and transmitted using TDM (i.e. in different time slots). The multiplexed signal is de-multiplexed and demodulated to obtain the original input signal. This entire process can be visually analysed and tested at various test points.
11. CDMA Experimental System

CDMA experimental setup provides a basic understanding and practical teaching of Code Division Multiple Access and Spread Spectrum Communication. It gives an in-depth knowledge of various issues considered in the design of a DS-SS system like pseudorandom (PN) codes and digital modulations schemes, decoding, zero random bit signal generation etc.
12. GSM Experimental Set

A GSM communication platform is a complete medium to demonstrate the transmission of voice and data calls as well as SMS (Short Message Service) in a GSM Network. To control the GSM modem there is an advanced set of AT commands for camping to real networks using SIM card.
13. Microwave Test Bench

The Microwave Test Bench is a precision made microwave system, which uses standard type rectangular wave-guide components to illustrate the essential elements of microwave communication for its detailed study. It assists the students to understand all the concepts of microwave transmission and the different components used for microwave communication along with their parameters.
14. ECG/ Heart Rate Monitor

Provides the in-depth study of Electrocardiogram, ECG standard leads configuration and the measurement of the heart-rate i.e. number of ECG pulses (heartbeats) per minute. Instrumental and significant in carrying out bio-medical engineering research based on ECG monitoring, processing and its applications.
15. EMG Trainer with In-built EMG Simulator (Biomedical Engineering Application Toolkit)

EMG Trainer set enables EMG signals observation by affixing pre-gelled Ag-AgCl surface electrodes at the surface to the body near a muscle of interest. Such EMG measurements are intended to obtain an indication of the amount of activity of a group of muscles, rather than of an individual muscle fibre. It also consists of built-in EMG Simulator to generate simulated EMG signals, which are used for further processing in bio-medical engineering research.
16. EPABX Experimental Setup

Electronic Private Automatic Branch Exchange training system for basic understanding of working of a telephone exchange. It is an ideal experimental platform that helps in learning the operation of Automatic Telephone Exchange and demonstrates switching phenomenon, call setup, study of signalling tones, Pulse and DTMF dialling, abbreviated dialling, distinctive dialling etc. EPABX plays a critical role in providing a practical demonstration of Telecommunication Switching./p>

17. EEG Trainer with In-built EEG Simulator (Biomedical Engineering Application Toolkit)

EEG Trainer set is a means to observe waveforms generated at various point on human scalp with an in-built EEG Simulator that helps the user to understand different measurement points and their combinational waveform either in average recording mode or uni-polar recording mode. Such waveforms are further examined, processed and analysed for various research applications in the field of bio-medical engineering.

18. miBEAT (Biomedical Engineering Application Toolkit)

A biomedical engineering application toolkit which is a medical grade data acquisition system used to obtain diagnostic quality signals to learn, implement and modify concepts of Digital Signal Processing and use them for research purposes. It is a complete learning solution that provides an in-depth study of the bio-signals and its processing e.g. ECG using wavelets to extract Heart Rate Variability in Time Domain, Frequency Domain etc

19. Satellite Navigation System (GPS) Setup

Satellite Navigation System setup is an experimental setup that enables the user to acquire the skills of Global Positioning System technology through Satellite Position, GMT Time, Latitude, Longitude, Speed etc using GPS Platform and Protocol. It is a user-friendly learning platform that endows a basic understanding of the GPS Fundamentals, Satellites & Design Aspects of GPS Receiver by actually connecting to the Satellite via GPS Antenna.