FOLLOW

Mechanical Engineering

Home Programmes
Life@ME
Events
People
Placement
Facilities
Alumni
Research & Innovation
Parent's Testimonial
Career

Papers Published

Publications Patents

Prof. Vivek Kumar
  • “Ecoflush - waste water recycling and rain water harvesting toilet flush system,” Adv. Res. Mech. Prod. Ind. Engg., vol.1, pp.141-143, June’15 and "EcoFlush - Wastewater Recycling and Rainwater Harvesting Toilet Flush System," in International Conference on Advancements and Recent Innovations in Mechanical, Production and Industrial Engineering , ARIMPIE 2015, 2015.
  • "Review of Vehicle Emission Measurement and Sampling System," in National Conference on Advances in Mechanical, Automobile & Production Engineering , 2015.
  • "Alternative Fuels - Opportunities, Difficulties and Future , Aspects," in National conference on Alternative fuels and controls for automobile, Manav Rachna International university, Faridabad, 2013.
  • "Optimization of power generation system utilizing a salt gradient solar pond," in International Conference on Manufacturing Excellence, 2012.
  • "Comparative Performance Analysis of Diesel Engine using JOME, KOME and MOME blends," in EVME ,National conference at Anand engineering college, Agra, 2011.
Prof. Vivek Kumar
  • “Ecoflush - waste water recycling and rain water harvesting toilet flush system,” Adv. Res. Mech. Prod. Ind. Engg., vol.1, pp.141-143, June’15 and "EcoFlush - Wastewater Recycling and Rainwater Harvesting Toilet Flush System," in International Conference on Advancements and Recent Innovations in Mechanical, Production and Industrial Engineering , ARIMPIE 2015, 2015.
  • "Review of Vehicle Emission Measurement and Sampling System," in National Conference on Advances in Mechanical, Automobile & Production Engineering , 2015.
  • "Alternative Fuels - Opportunities, Difficulties and Future , Aspects," in National conference on Alternative fuels and controls for automobile, Manav Rachna International university, Faridabad, 2013.
  • "Optimization of power generation system utilizing a salt gradient solar pond," in International Conference on Manufacturing Excellence, 2012.
  • "Comparative Performance Analysis of Diesel Engine using JOME, KOME and MOME blends," in EVME ,National conference at Anand engineering college, Agra, 2011.
Dr. Achhaibar Singh
  • "Optimization of Tolerances for the External Surfaces of the UAV Design," in AIAA, , 2013.
  • " Construction of an algorithm determining the optimal tolerances for the design of UAV," in IX Int. Conf. of Scientific and Practical Materials, Poland, 2013
Mr. Shyamal Samant
  • “Understanding Issues in Supply Chain in Indian Manufacturing SMSs”, International Conference on Manufacturing Excellence,2013
Dr. R.K. Tyagi
  • “Abrasive Jet machining by means of Velocity Shear Instability in Plasma”, Journal of Manufacturing Science and Engineering. Vol. 14, No,3, pp.323-327, 2012.
  • “Surface coating by velocity shear instability in plasma”, Theoretical Foundation of Chemical Engineering, Vol.46, No.5, pp.594-600, 2012.
  • “Non Traditional Machining processes by means of Velocity Shear Instability in Plasma”, Surface Engineering and Applied Electrochemistry. Vol. 48, No.1, pp. 64-68, 2012.
  • “Analysis of Electrostatic ion cyclotron instability driven by Parallel flow velocity Shear Instability”, Surface Engineering and Applied Electrochemistry. Vol. 47, No.4, pp. 370-377, 2011.
  • “Theoretical Analysis of Silicon Roughness induced by Plasma Etching”, Surface Engineering and Applied Electrochemistry. Vol. 49, No,1, pp.78-82, 2013. (Springer Journal)
  • “Performance Studies on Flat Plate Solar Air Heater subjected towards Flow Patterns”, Applied Solar Energy. Vol.50, No., pp.98-102, 2014. (Springer Journal)
  • “Effect of Heating Catalytic Converter on Emission Characteristic of Gasoline Automotive Vehicles”, International Journal of Ambient Energy. Vol.34, No., pp.-, 2013. (Taylor and Francis Journal)
  • “Emission Characteristic of Hydrogen and Gasoline Blend in S.I”, International Journal of Ambient Energy. Accepted. (Taylor and Francis Journal). Vol 35, 2015.
  • “Conversion Efficiency of Catalytic Converter”, International Journal of Ambient Energy, (Taylor and Francis Journal), Vol. 35, 2015.
  • “The Effect of Angle of Impact and Flow Quantity on output Power of Impulse Water Wheel Model”, Journal of Energy in Southern Africa, vol.26, No.3, pp. 100-104. 2015.
  • “Improved intake manifold designs for Emission Control”, Journal of Engineering Science and Technology, Vol.10, No.4, pp. 2015.
  • “Change in Efficiency by Reusing a Dialyzer”, International Journal of Applied Engineering Research (IJAER), Vol.10, No.2 pp: 2513-2521. 2015.
  • “A Technical Review on Engineering Applications of Nitinol”, International Journal of Applied Engineering Research (IJAER, Vol.10, No.1, pp.589-618, 2015.
  • “Evaluation of Methanol Gasoline Fuel Blends on Exhaust Emission of Single Cylinder Spark Ignition Engine”, Iranica Journal of Energy and Environment, Vol.6, No.3, pp. 161-166, 2015.
  • “An effective parabolic solar collector”, Iranica Journal of Energy and Environment, Vol.6, No4, pp. 269-273, 2015.
  • “Biodiesel Production & its Performance Characteristics Measurement: A Review and Analysis”, Journal of Chemical and Pharmaceutical Research, Vol.7, No.5, pp. 1075-1082, 2015.
  • “Study of emission characteristics of single cylinder four stroke spark ignition engine using gasoline-ethanol blends”,Journal of Chemical and Pharmaceutical Research, Vol.7, No.7, pp.640-644, 2015.
  • “Hydrogen Fuelled Internal Combustion Engine: A Review of Technical Feasibility”, International Journal of Performability Engineering, Vol.11, No.5, pp. 403-415, 2015.
  • “Ecofriendly catalytic converter to reduce biochemical effect of exhaust gases”, Der Pharma Chemica, Vol.7, No.12, pp.56-61, 2015.
  • “Aeration of volatile organic compounds using gas dispersion impellers”, Journal of Mechanical Engineering and Research (Academic Press). Vol4, No.7, pp.213-224, 2012.
  • “Heat Flux and Plasma Parameters in Plasma Welding By Means of Velocity Shear Instability” Journal of Engineering and Technological Research (Academic Press). Vol. 4, No.4, pp. 65-70, 2012.
  • “Analytical and experimental study of velocity Shear Instability in the presence of inhomogeneous perpendicular D.C electric field”, Journal of Engineering and Technological Research (Academic Press). Vol. 3, No.4, pp. 118-126, 2011.
  • “Effect of Electric and Magnetic field on metal cutting by Velocity Shear Instability” , Journal of Emerging Trends in Engineering and Applied Science (Scholar Link). Vol. 2, No.4, pp.693-697, 2011 (I.F=1.25).
  • “Effect of Electric and Magnetic field on Welding parameters”, Journal of Engineering, Science and Technology (Multi Craft). Vol. 3, No.8, pp.168-176. 2011.
  • “Effect of different plasma parameters on plasma energy by means of velocity shear instability” European Journal of Applied Engineering & Scientific Research. Vol1, No.3, pp.57-61, 2012.
  • “Wind energy and role of effecting parameters”, European Journal of Applied Engineering & Scientific Research. Vol1, No.3, pp.73-83, 2012.
  • “Hydraulic turbine and effect of different parameters on output power”, European Journal of Applied Engineering & Scientific Research. Vol1, No.4, pp.179-184, 2012.
  • “An Innovative Approach for Automatic Car Cover”, International Journal of Innovative Research in Science, Engineering and Technology, vol.2, no.9, pp. 4825-4829, 2013.
  • “The Mechanism and Kinematics of a Pantograph Milling Machine” European Journal of Applied Engineering & Scientific Research. Vol.2, No.3, pp.1-5, 2013.
  • “Reduction of Rejected Components in an Automobile Assembly line using Quality Tools” European Journal of Applied Engineering & Scientific Research. Vol.2, No.3, pp.13-17, 2013.
  • “An Innovative Approach for Cold Spray Technology”, Asian Journal of Current Engineering and Maths. Vol.2, No.5, pp.342-344, 2013.
  • “New Model Process Development and Cycle Time Achievement for Closer Line Door Assembly” Asian Journal of Management. Vol.4, No.3, pp.137-140, 2013.
  • “Study of Specific Power input and Mass Transfer Coefficient in Aeration of Volatile Organic Compounds “, International Journal of Water Resources and Environmental Engineering (Academic Press), vol.5, no.3, pp. 141-145, 2013
  • “Effect of hydrogen and gasoline fuel blend on the performance of SI engine”, Journal of Petroleum Technology and Alternative Fuels. Vol.4, No.7, pp.125-130, 2013.
  • “A Review of Few Unconventional Machining Process based on the concept of Velocity Shear Instability in plasma”, Production and Manufacturing Research. Vol.3, No.2. pp. 41-49, 2014. (Taylor and Francis Journal)
  • “A Review on welding/cutting with and without Velocity Shear Instability in plasma”, Journal of Machinery Manufacturing and Automation. Vol.2, No.1. pp. 216-227, 2014.
  • “Mechanical Characterization of Banana/Sisal Fibre Reinforced PLA Hybrid Composites for Structural Application”, Engineering International. Vol.1, No.1, pp.39-49. 2014.
  • “Development of Design of Motor using one Way Nitinol”, Archives of Applied Science Research. Vol.7, No.4. pp. 64-67, 2015.
  • “Kinematic analysis of Automated Elliptical Trammel for cutting applications”, Archives of Applied Science Research. Vol.7, No.5. pp. 2015.
  • “ Dynamic analysis of a shaper machine cutting tool and crank pin”, Journal of Environmental Science, Computer Science& Engineering Technology, vol.1, no.3, pp. 372-380, 2012.
  • “Comparative study of exhaust emission of commonly used fuel in an internal combustion engine”, Journal of Environmental Science, Computer Science& Engineering Technology, vol.2, no.1, pp. 52-56, 2013.
  • “ Effect of Different Types of Alternative Fuel Type on Air Pollution”, Journal of Environmental Science, Computer Science& Engineering Technology, vol.2, no.3 pp. 534-540, 2013.
  • “Survey on Water Cooling System Failure Analysis for Diesel Electric Locomotives”, International Journal of Advance Research and Innovation, vol.2, no.2, pp. 12-24, 2013.
  • “Solar Tracker Mounted Battery Electric Vehicle”, International Journal of Advance Research and Innovation, vol.2, no.2, pp. 6-11, 2013.
  • “Effect of Velocity Shear Instability on Diesel engine ignition delay”, Journal of Mechanical Engineering. Vol. 2, No.1, pp.61-64, 2011.
  • “An Erosive Wear model to predict erosion in metals for multi-particle impact at normal incidence”, Journal of Mechanical Engineering. Vol. 1, No.2, pp.73-79, 2010.
  • “Computer aided design tools to aesthetic design”, Global Journal of Enterprise Information System. Vol. 2, No.1, pp.46-49, 2010.
  • “Economic Automobile Immobilizer”, International Conference of Advance Research and Innovation (ICARI-2014), ISBN 978-93-5156-328-0, p.122.
Mr.Rajendra Kumar Shukla
  • “Experimental Study for Investigating the Mechanism of Heat Transfer near the Critical Heat Flux in Nucleate Pool Boiling,” Int. J. of Engg., Vol. 28, pp. 1241-1250, Sept.’15.
Dr. Varinder Kumar Mittal
  • "Adoption of Green Manufacturing in Indian Manufacturing Industry: A Fuzzy Analytical Hierarchy Process (FAHP) Approach for Inhibitors" International Journal of Industrial and Systems Engineering, In Press.
Dr.Basant Singh Sikarwar
  • “Imaging based Method for Precursors of Impending Diseases from Traces,” J. Advance Intelligent& Computing System, Springer, ICDECT, vol-20, pp 551-557, 2016
  • “Automatic Pattern Recognition for Detection of Disease from Blood Drop Stain obtained with Microfluidic Device,” J. Advance Intelligent & Computing System, Springer, vol-425, pp 655-667, 2015
  • “Design and Fabrication of Microfluidic Device for Measuring Surface Tension of Biological Fluids,” Proceeding of India International Science Festival conferences Department of Science & Technology, Govt. of India, 2015.
  • “Screening Tool Based on Physical Properties of Blood”. World Academy of Science, Engineering and Technology, International Science Index, Biomedical and Biological Engineering, 2(12), 353, 2015
  • “Atomistic Modeling of Condensation of Water Vapor”, Proceeding of 60th DAE Solid State Physics Symposium (DAE-SSPS-2015) December 21-25, 2015.
  • “Parametric Study of Sessile Drop Evaporation at Atmospheric Condition”, Proceedings of the 17th ISME Conference, ISME-17, IIT Delhi, India, October 3 -4, 2015
Ms Megha Sharma
  • “Development & Test of Low Cost Catalytic Converter from ZnO/ CoO in form of Pellet for Petrol Fuel Engine”, International Conference on Manufacturing Excellence,2012
  • “Job-Shop Scheduling to Minimize Total Tardiness in e-Manufacturing Environment using Genetic Algorithm”, International Conference on Manufacturing Excellence,2013
  • “Simulation of Solar Absorption Cooling System for Domestic Application”, International Conference on Manufacturing Excellence,2013
Mrs. Nazma Ethesham
  • "Experimental Investigation of Improvement in Productivity and Cycle Times for Crankshaft Applications Using Ceramic Grinding Whee," in International Conference on Manufacturing Excellence, Manfex Proceeding, Noida, 2013.
Mr. Hemant Chauhan
  • Optimizing Machining Parameters in Machining of Uni-Directional Glass Fibre Reinforced Plastic Composite Laminates using Taguchi Method, in “International Conference on Manufacturing Excellence” (MANFEX-2013), Amity University, Noida, May 30 – 31, 2013
  • Light Diffusing Omni-Bot, in “International Conference on Manufacturing Excellence” (MANFEX-2013), Amity University, Noida, May 30 – 31, 2013
  • Implementation of Green Manufacturing: A review, in International National Conference on Manufacturing Excellence (MANFEX-2012), Amity University, Noida, March 29 – 30, 2012
  • Wall Climbing Robot for Rough, Grooved and Smooth Walls, in “International Conference on Manufacturing Excellence” (MANFEX-2012), Amity University, Noida, March 29 – 30, 2012
  • The Future of Self Learning Robots through Haptics Technology, in “International Conference on Manufacturing Excellence” (MANFEX-2012), Amity University, Noida, March 29 – 30, 2012
  • Creative Problem Solving Approach to Enhance Functionality of Vacuum Cleaner, in “International Conference on Manufacturing Excellence” (MANFEX-2012), Amity University, Noida, March 29 – 30, 2012
  • Effect of Specific Surface Area on the Shear Rheology of Fumed Silica Dispersions, International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 9) Dec. 10-12, 2015 at IIT Bombay.
  • Effect of aspect ratio on compressive properties of Kevlar-High Impact Polypropylene composite under high strain rate loading, Int. Conf. on International Conference on Precision, Meso, Micro and Nano Engineering (COPEN) Dec. 10-12, 2015 at IIT Bombay.
Dr. Meeta Sharma
  • “Exergy Analysis of Dual Pressure HRSG for Different Dead States and Varying Steam Generation States in Gas/Steam Combined Cycle Power Plant”, Applied Thermal Energy (Elsevier), Vol. 93, pp. 614–622, Jan 2016.
  • Exergy Based Parametric Evaluation of Heat Recovery Steam Generator (HRSG)”, Heat Transfer - Asian Research (Wiley), Vol.45, pp. 1–14, Jan 2016.
  • “Investigations for Performance Enhancement of Dual Pressure HRSG in Gas/Steam Combined Cycle Power Plants”, International Journal of Ambient Energy (Taylor & Francis) DOI: 10.1080/01430750.2015.1100680, Oct 2015
  • “Parametric Evaluation of Heat Recovery Steam Generator (HRSG)”, Heat Transfer -Asian Research (Wiley), DOI: 10.1002/htj.21106, Vol. 43, pp 691–705, Dec 2014.
  • “Thermodynamic Evaluation of WHRB for its Optimum performance in Combined Cycle Power Plants”, IOSR Journal of Engineering, Vol.2, pp11-19, Dec2012.
Mr. Krishna Mohan Agarwal
  • “Study of performance parameters of single cylinder four stroke spark ignition engine using gasoline - Ethanol Blends,” Int. J. of Tech. Enh. Emer. Engg. Res., vol.3, no.2, pp.44-46, Feb’15.
  • “Biodiesel production & its performance characteristics measurement: A review and analysis,” J. Chem. and Pharma. Res., vol.7, no. 5, pp.1075-1082, April’15.
  • “Study of emission characteristics of single cylinder four stroke spark ignition engine using gasoline-ethanol blends” , Journal of Chemical and Pharmaceutical Research, 2015; 7(7):640-644; ISSN : 0975-7384, 2015
Mr. Priyank Srivastava
  • “Integration Agile thinking into maintenance strategy performance analysis”, International J. of Process Management &Benchmarking, Vol. XX, pp.XX-XX,2015.
  • “Development of design of motor by using one-way nitinol”, Archives of Applied Science Research, Vol.7(4),pp. 64-67,2015
Mr. Naveen Anand Daniel
  • “Parametric Optimization & Simulation of Mild Steel Cup In Deep-Drawing Using LS-Dyna,” Int. J. App. Engg. Res., vol.10, no.9, pp.24479-24489, 2015.
Dr. Umesh Kumar Vates
  • “Parametric Optimization & Simulation of Mild Steel Cup In Deep-Drawing Using LS-Dyna,” Int. J. App. Engg. Res., vol.10, no.9, pp.24479-24489, 2015.
  • “Modeling and Optimization of Wire Electrical Discharge Machining Process on D2 Steel using ANN and RMSE”, International journal of computational sciences and surface engineering, 2015
Mr. Sanjeev Kumar Sharma
  • “Experimental Study for Investigating the Mechanism of Heat Transfer near the Critical Heat Flux in Nucleate Pool Boiling,” Int. J. of Engg., Vol. 28, pp. 1241-1250, Sept.’15.
  • “Parametric study of Sessile drop Evaporation at atmospheric condition,” 17th ISME Conference on advances in Mechanical Engineering at IIT Delhi, 3-4 October 2015.
  • “Atomistic Modeling of Dropwise Condensation,” DAE Solid State Physics Symposium (DAE-SSPS-2015) at Amity University, Noida, 21-23 December 2015.
Mr. Shubham Sharma
  • "Structural Optimization with Codo Method for a three Dimensional Sheet Metal Body," in International Conference on Manufacturing Excellence, 2012.
  • "Finite Element Analysis of Hard Turning," in International Conference on Manufacturing Excellence, 2012.
  • “Investigation of Wear Characteristics of Aluminum Disc with Pin on Disc Tribometer,” Int. J. Sci. & Engg. Res., vol.6, no.1, pp. 1932-1939, Jan’15.
  • "Optimization of Cutting Parameters on CNC Lathe to Improve the Surface Roughness by Response Surface Methodology (RSM)," in International Conference on Manufacturing Excellence, Noida, 2013.
  • "A Review on Manufacturing of Composite Materials by Electromagnetic Stir Casting Method," in International Conference on Manufacturing Excellence, Noida, 2013.
Mr. Rahul Sindhwani
  • “Modelling the attributes affecting design and implementation of agile manufacturing system”, International Journal of Process Management and Benchmarking, International Journal of Process Management and Benchmarking, Vol. 6, No. 2, pp.216-234 (2016).
  • “Modelling And Analysis of Agile Manufacturing System by ISM And MICMAC Analysis”, International Journal of System Assurance Engineering & Management, DOI: 10.1007/s13198-016-0426-2(2016)
  • “Lean and Agile Manufacturing System Barriers”, International Journal of Advance Research and Innovation Vol. 3(1), 2015, pp. 110-112; ISSN 2347 – 3258
  • “Design of Electric Bike with Higher Efficiency”, International Journal of Advance Research and Innovation; Vol. 1 (2014) ISSN 2347 - 3258 ; March 2014; pp 247-251
  • “Reducing in Casting Defects by Using DMAIC Approach”, International Conference on Manufacturing of Excellence (MANFEX -2013), Amity University, ISBN: 978-93-83083-17-6, May 2013
  • “Factors affecting the automatic rain sensing wiper system”, National Conference on Trends & Advances in Mechanical Engineering (TAME 2012), ISBN: 978 -93-5087-2, YMCAUST, Faridabad, 19-20th October 2012.
  • “Recognition of JIT Elements for Service Sector”, International Conference on Manufacturing Excellence (MANFEX 2012), ISBN: 978-93-81583-36-4, Amity University, (Noida), 29-30 March 2012.
Ms.Medhavi Sinha
  • "Structural Optimization with Cadop Method for a Three Dimensional Sheet Metal Body," in International Conference on Manufacturing Excellence, 2012 .
  • "Inverse Heat Transfer," in International Conference on Manufacturing Excellence, 2012.
  • "Finite Element Modeling & Burst Pressure Analysis of Cylindrical Composite Pressure Vessel," in International Conference on Manufacturing Excellence, 2012.
Mr. Naveen Kumar
  • “Review on Current Research Work in Wire Electrical Discharge Machining, IJARI”, Volume 3, Issue1 pg 68-76, 2015.
Mr. Prem Narayan Vishwakarma
  • "Gear Manufacturing Process," in International Conference on Manufacturing Excellence, Noida, 2013.
  • "Design and Analysis of Shell Milling Cutter Using FEM," in International Conference on Manufacturing Excellence, Noida, 2013.
Mr. Manish Kumar Ojha
  • “Development & Test of Low Cost Catalytic Converter from ZnO/ CoO in form of Pellet for Petrol Fuel Engine”, International Conference on Manufacturing Excellence,2012
  • “Job-Shop Scheduling to Minimize Total Tardiness in e-Manufacturing Environment using Genetic Algorithm”, International Conference on Manufacturing Excellence,2013
  • “Simulation of Solar Absorption Cooling System for Domestic Application”, International Conference on Manufacturing Excellence,2013
Ms. Richa Sharma
  • "Evaluation of Overall Equipment Effectiveness (OEE) based on Total Productive Maintenance (TPM) Approach," in Proceedings of 3rd International Conference on Industrial Engineering (ICIE-2015) , SVNIT, Surat., 2015.
  • " Implementation of 5S practices : A Review," in International Conference on Uncertain Supply Chain Management (growing science. Com), 2014.
  • "TPM Implementation: A systematic approach to successful operations in Indian Manufacturing organizations," in STME-2013, 2013.
  • “Enhancing productivity at assembly line : A study in automobile manufacturing sector” , International journal of Advance Research and innovation , ICARI , 2014
Mr. Mohit Bhandwal
  • “Ecofriendly catalytic converter to reduce biochemical effect of exhaust gases”, Der pharma Chemica, 7(12):56-61, 2015
  • “Duct inspection and cleaning robot”, SARC International conference on recent development in Mechanical and Industrial Engineering (ICRDMIE), 2015
  • “Gesture controlled quadcopter”, Indian Science Congress Association, 2015
  • “CFD Analysis to Calculate Lift and Drag Coeffiecient for Ariel Robot”, Proceedings of the India International Science Festival- Young Scientists’ Meet , Dec 4-8, 2015
Mr. Atul Sharma
  • "Job-Shop Scheduling to Minimize Total Tardiness in e-Manufacturing Environment using Genetic Algorithm," in International Conference on Manufacturing Excellence, 2013.
  • "High Performance Mechatronic Control Systems," in Proceedings of ASME , 2011.
  • “Investigation of Wear Characteristics of Aluminum Disc with Pin on Disc Tribometer,” Int. J. Sci. & Engg. Res., vol.6, no.1, pp. 1932-1939, Jan’15.
  • “Investigation of Wear Characteristics of Aluminum Disc with Pin on Disc Tribometer,” Int. J. Sci. & Engg. Res., vol.6, no.1, pp. 1932-1939, Jan’15.
  • “New Technologies Used In Automotive Exhaust Systems : Review,” Int. J. Mech. Engg. Tech., Vol.5, No. 9, pp. 293-305, Sept.’14
  • ” Optimal Automobile Muffler Vibration And Noise Analysis,” Int. J. Auto. Mech. Engg., Volume 7, pp. 864-881, June 2013
  • ”Application of Piezoelectric Device in Automotive Control Going towards Hybridization,” Int. J. Mech. Engg. Res., Vol. 2, No. 3, 2013.
  • “Gas Turbines- Current Scenario & Future Prospects in India,” Int. J. Sci. & Engg. Res., Vol. 6, no 8, pp. 867-876. Aug.’15
Mr. Lalit Ahuja
  • "High temperature corrosion behaviour of superalloys under actual waste incinerator environment" Engg. Failure Analysis, Feb 2016, doi:10.1016/j.engfailanal.2016.02.016
Dr.Deepa Mudgal
  • "High temperature corrosion behaviour of superalloys under actual waste incinerator environment" Engg. Failure Analysis, Feb 2016, doi:10.1016/j.engfailanal.2016.02.016
Mr. Akash Yadav
  • “Empirical models for change in pH and temperature within gravity-based reactor columns,” Des. Water Treat., Vol. 55, No. 12, Sep’14.
Mr. Jaspreet Hira
  • “Fabrication of Hybrid Mg/(Al2O3p+ SiCp + Grp) Metal Matrix Composite on Developed Gas Injection Liquid Stir Casting Setup,” Ara. J. Sci. and Engg., Vol. 40, No. 9 ,pp. 2729-2738, Sept’15.
Dr. Pallav Gupta
  • “Closed Die Deformation Behavior of Cylindrical Iron-Alumina Metal Matrix Composites During Cold Sinter Forging” In Press J. of Inst. of Eng. (India): Series D, DOI: 10.1007/s40033-015-0089-1, 2015.
  • “Effect of Sintering Mechanism on the Properties of ZrO2 reinforced Fe Metal Matrix Nanocomposite” Published J. of Comp. Article ID 456353, pp 1-8, 2015.
  • “Influence of Processing Parameters on Corrosion Behavior of Metal Matrix Nanocomposites” In Press J. of Mater. and Env. Sci., 2016.