- Mittal, V. K., Sindhwani, R., Shekhar, H. and Singh P. L. (2018) ‘Fuzzy AHP model for challenges to thermal power plant establishment in India’, Int. J. Operational Research. (In Press) (SCOPUS Indexed)
- Phanden, R.K., Sindhwani, R., Kalsariya V., Salroo, F., (2018) ‘Selection of material for electric arc spraying by using hierarchical Entropy- TOPSIS approach’, International Journal of Productivity and Quality Management. (In Press) (SCOPUS Indexed)
- Sindhwani, R., Mittal, V.K.., Singh P.L., Kalsariya, V., Salroo, F. (2018) ‘Modelling and analysis of energy efficiency drivers by Fuzzy ISM and Fuzzy MICMAC approach’ International Journal of Productivity and Quality Management. (In Press) (SCOPUS Indexed)
- Srivastava, P., Khanduja, D., Agrawal, V.P. (2018), “Integrating Thinking into maintenance strategy performance analysis”, International Journal Process Management & Benchmarking. Vol. 8 (2), 228-245.DOI: 10.1504/IJPMB.2018.10006958 (SCOPUS Indexed)
- Sindhwani, R., & Malhotra, V. (2018), “An Integrated Approach for implementation of Agile Manufacturing System in an Indian Manufacturing Industry”, Benchmarking: An International Journal, Vol. 25 (4), pp 1-20. (SCOPUS Indexed)
- Shukla, R. K., Dixit, G., and Agarwal, A (2018), “Modelling supply chain coordination for performance improvement using Analytical Network Process (ANP) based approach” International Journal of Business Excellence, 14 (1), pp. 18-48. (SCOPUS Indexed)
- M, Singh. O, (2018), “Thermodynamic Study of Multi Pressure HRSG in Gas/Steam Combined Cycle Power Plant”, Springer (Journal of the Institution of Engineers (India): Series C, Vol. 99(1). pp. (1-9). (SCOPUS Indexed)
- A Mishra, Singh Kulbir, R. Suresh Kumar and P. Chellapandi (2018). Experimental and numerical simulation of thermal ratcheting behavior with thermomechanical interactions. International Journal of Pressure Vessels and Piping, (in Press) (SCOPUS Indexed)
- Bhat S and Narayanan S. (2018),“Finite element investigation on mode I crack tip characteristics in residually stressed Glare”, International Journal of Structural Integrity, In-Press. (SCOPUS Indexed)
- Bhat S. (2018), “Elasticity based stress analysis: A review with basic principles”, Indian Journal of Science and Technology, In-Press.
- Nand J. K., Vates U. K., Singh G. K. and Chavan S. (2018), "Fracture problems, vibration, buckling, and bending analyses of functionally graded materials: A state-of-the-art review including smart FGMS", Particulate Science and Technology. (SCI- in press).
- Gupta S., Dangayach, G. S., Singh, A. K., Meena M. L. & Rao P. N. (2018), Implementation of sustainable manufacturing Practices in Indian manufacturing companies. Benchmarking: an International Journal. Emerald Publisher. (In Press) (SCOPUS Indexed)
- Gupta, S., Dangayach, G. S., Singh, A. K., Meena M. L. & Rao, P. N. (2018). “Adoption of Sustainable Supply Operation Quality Practices and their impact on Stakeholder’s Performance & Sustainable performance for Sustainable Competitiveness in Indian Manufacturing Companies”. International Journal of Intelligent Enterprise. Inderscience Publisher. (In Press). (SCOPUS Indexed)
- Rao Srinivasa, Rao K. Srinivasa, Rao P. Srinivasa, Rao S. R. Koteswara , Reddy G. Madhusudan (2018), "Effect of friction stir welding on pitting and stress corrosion cracking behavior of AFNOR7020-T6 aluminium alloy". Protection of metals and Physical Chemistry of Surfaces (Springer) SCI, In press.
- Samant, S., Mittal, V., & Prakash, R (2018), “Resource optimization for an automobile chassis manufacturer through value stream mapping enhanced with simulation technique and constraint programming”. Int. J. Industrial and Systems Engineering (IJISE) (In press). (SCOPUS Indexed)
- Sharma, R., Singh, J. and Rastogi, V (2018), “The impact of total productive maintenance on key performance indicators (PQCDSM):- A case study of automobile manufacturing sector”, International Journal of Productivity and Quality Management (In press) (SCOPUS Indexed)
- Jamwal U, Panchal D and Kumar A, (2018), “Change management in Indian pharmaceutical industry: a case study.” International Journal logistic systems and managemen Vol. 27 (3), DOI: 10.1504/IJLSM.2017.084464 (SCOPUS Indexed)
- Panchal D. and Srivastava P., (2018), “Fuzzy methodology application for failure analysis of transmission system, Int. J. Mathematics in Operational Research, 12 (2), pp. 220-237. (SCOPUS Indexed)
- Bhasin, P., Bhandwal, M., Sikarwar, B., (2018), “Spark Ignition Engine Emission Characteristics by Using Blend of Ethanol and Gasoline” Indian Journal of Science & Technology. (In press)
- Sharma, R. (2018) “Overall Equipment Effectiveness (OEE) measurement of TPM manager model machines in flexible manufacturing environment: A case study of automobile sector”, International Journal of Productivity and Quality Management. (In Press) (SCOPUS Indexed)
- Bhandwal, , Tyagi, R. K. and Sikarwar B. S. (2018), “Estimate the Performance of Catalytic Converter using Turbulance Induce devices”. International Journal of Engineering. (Accepted for Publication) (SCOPUS Indexed)
- Sharma, M. and Singh, O., (2018), “Thermodynamic Study of Multi Pressure HRSG in Gas/Steam Combined Cycle Power Plant”, Journal of The Institution of Engineers (India): Series C, pp.1-9, DOI: https://doi.org/10.1007/s40032-017-0423-5. (SCOPUS Indexed)
- Sharma, M. and Singh O., (2018), “Exergo-economic study of dual pressure HRSG in gas/steam combined cycle plants”, International Journal of Ambient Energy, pp.1-27, DOI: https://doi.org/10.1080/01430750.2018.1443496. (SCOPUS Indexed)
- Sood, M., and Dwivedi G., (2018), “Effect of fiber treatment on flexural properties of natural fiber reinforced composites: A review”, Egyptian Journal of Petroleum, (Accepted for Publication), DOI: https://doi.org/10.1016/j.ejpe.2017.11.005.
- Ratna S. and Prasad D. (2018) “ANN based optimization model for die casting of aluminium alloy LM6” International Journal of Mechanical and Production Engineering Research and Development. (in press) (SCOPUS Indexed)
- Misra, S., Ratna, S., and Singh, U.K., (2018) “Analysis of solidification thickness during phase change using heat balance integral method” International Journal of Mechanical and Production Engineering Research and Development. (in press) (SCOPUS Indexed)
- Mathur, B., Gupta, S., Meena, M. L., Dangayach, G.S., "Healthcare Supply Chain Management: Literature Review & Some Issues" Journal of Advances in Management Research. Emerald Publication. (ESCI) (Accepted in Press).
- Mathur, B., Gupta, S., Meena, M. L., Dangayach, G. S., "Impact of Supply chain practices on Organizational Performance with Moderating effect of Supply chain performance in Indian Health Care Industry" International Journal of Supply Chain Management (IJSCM) (Scopus Indexed) (Accepted in Press).
- Panchal, U. Jamwal, Srivastava P., Kamboj K. and Sharma R. (2018), “Fuzzy methodology application for failure analysis of transmission system”, Int. J. Mathematics in Operational Research, Vol. 12(2), pp. 220-237. . https://doi.org/10.1504/IJMOR.2018.089678 (SCOPUS Indexed)
- Ratna S., Shubham A. and Saifuddin M. (2018), “Assessment of Lean Performance of Manufacturing Cells in an SME using AHP”,International Journal of Mechanical and Production Engineering Research and Development, 8(3), pp. 435-440. (SCOPUS Indexed)
- Mathur B., Gupta S., Meena M. L. and Dangayach, “Impact of supply chain practices on organizational performance with moderating effect of supply chain performance in Indian health care industry”, International Journal of Supply Chain Management, Vol. 7(4). In Press (SCOPUS Indexed)
- Tyagi, R.K. and Singh, A (2018).,''An Experimental Study on Composite Material Yoke and Wooden Yoke for Bullocks Comfort”, Journal of Applied Animal Welfare Science, Vol. 21 (2), pp.103-107 (SCOPUS Indexed)
- Panchal D, Kumar U, Srivastava P, Kamboj K, Sharma R (2018) “Integrated framework for failure analysis in Automobile industry: a case study from India” International journal of mathematics in operational research. (in press) (SCOPUS Indexed)
- Dwivedi G., Sharma M. P. and Verma P. (2018), “Optimization of Storage Stability for Karanja Biodiesel Using Box-Behnken Design”, Waste and Biomass Valorization, Vol. 9(4), pp 645-655. (SCOPUS Indexed)
- Mathur Bhavana, Gupta Sumit, Meena M. L. and Dangayach G. S. (2018), “Impact of Supply chain practices on organizational performance with Moderating Effect of Supply chain performance in Indian Health Care Industry”, International Journal of Supply Chain Management, Vol. 7(4), In Press. (SCOPUS Indexed)
- Chandrayan Bhavesh, Solanki Ankit Kumar, Sharma, Richa (2018), “Study of 5S Housekeeping Technique: A Review Paper”, International Journal of Productivity and Quality Management, In Press. (SCOPUS Indexed)
- Sharma Sunil Kumar and Kumar A. (2018), “Disturbance Rejection and Force Tracking Controller of Nonlinear Lateral Vibrations in Passenger Rail Vehicle Using MR Fluid Damper", Journal of Intelligent Material Systems and Structures, SAGE Publications, Vol. 29 (2), pp. 279 – 297. (SCI)
- Sharma Sunil Kumar and Sharma R. C. (2018), “Simulation of Quarter-Car Model with Magnetorheological Dampers for Improving Ride Quality”, International Journal of Vehicle Structures & Systems. In Press
- Sharma R. C. and Sharma Sunil Kumar (2018), “Rail Vehicle Modeling and Simulation using Lagrangian Method”, International Journal of Vehicle Structures & Systems. In Press
- Palli S., Koona R., Sharma Sunil Kumar and Sharma S. K. (2018), “A review on dynamic analysis of rail vehicle coach”, International Journal of Vehicle Structures & Systems. In Press
- Sindhwani R., Mittal V. K., Singh P. L., Kalsariya V., Tewari A. (2017), “A Hybrid Approach for Selection of Most Sustainable Cooking Fuel (MSCF) in Indian Context”. International Journal of Knowledge Management in Tourism and Hospitality, Vol. 1(2), pp. 226-240.
- Sindhwani, R., & Malhotra, V. (2017), “A Framework to Enhance Agile Manufacturing System: A Total Interpretive Structural Modelling (TISM) Approach, Benchmarking: An International Journal (Emerald Publisher), Vol. 24 (4), pp. 467-487. (SCOPUS Indexed)
- Shukla, R. K., Dixit, G., and Agarwal, A. (2017), “An empirical study of Coordination Practices in Supply Chain of Indian Manufacturing Firms”, International Journal of Productivity and Quality Management, Vol. 20(3), pp. 291-315. (SCOPUS Indexed)
- Asija, N., Chouhan, H., Gebremeskel, S.A. et al. J Nanopart Res (2017), “Influence of particle size on the low and high strain rate behavior of dense colloidal dispersions of nanosilica”, Journal of Nanopart Res. Vol. 19 (1), PP. 21. (SCOPUS Indexed)
- M, Singh. O. (2017), “Exergy Analysis of the Dual Pressure HRSG for Varying Physical Parameters”, Journal of Applied Thermal Energy, Vol. 114, pp. 993-1001. (SCOPUS Indexed)
- Panchal D, Kumar Dinesh (2017), “Stochastic Behavior Analysis of Real Industrial System", International journal of system assurance engineering and management. Vol. 8(2), pp. 1126-1142. (SCOPUS Indexed)
- Srivastava, P., Khanduja, D., Agrawal, V.P. (2017) “A framework of Fuzzy Integrated MADM and GMA for Maintenance Strategy selection based on Agile Enabler attributes”, Mathematics-in-Industry Case Studies: Springer, 8(5), pp. 1-23.
- Asija N, Chouhan H, Shishay Amare Gebremeskel, Bhatnagar (2017), ‘High Strain Rate Characterization of Shear Thickening Fluids using Split Hopkinson Pressure Bar Technique’, International Journal of Impact Engineering, 110, pp 365-370. (SCOPUS Indexed)
- Asija N, Chouhan H, Shishay Amare Gebremeskel, Singh Rama Kant, Bhatnagar Naresh (2017), ‘High Strain Rate Behavior of STF-Treated UHMWPE Composites,’ International Journal of Impact Engineering, 110, pp 359-364. (SCOPUS Indexed)
- Gupta, N., Sikarwar, S., Bhandwal, M. (2017), “Modelling and Simulation of Brake Disc for Thermal Analysis” Indian Journal of Science & Technology. 10, Vol. 17 (10), pp.1-5.
- Roy, M., Sikarwar, B. S., Bhandwal, M., Ranjan, P. (2017),“Computational Modelling of Cardiovascular Stenosis” Indian Journal of Science & Technology. Vol. 10(17), pp.10-16 .
- Rao G. Srinivasa, Rao V. Subba, Rao S. R. Koteswara. (2017), “Microstructure and mechanical properties of AA7020-T6 aluminium alloy friction stir welds”, Metal Science and Heat treatment (Springer), ISSN: 0026-0673, Vol. 59 (3-4), pp. 139-144. (SCOPUS Indexed)
- Rao G. Srinivasa, Rao V.V. Subba, Rao S. Koteswara. (2017), “Microstructure and salt fog corrosion behavior of AA2219 friction stir welded aluminium alloy”, Metal Science and Heat treatment (Springer), ISSN: 0026-0673, 59, (3-4), pp.223-231. (SCOPUS Indexed)
- Vates, U.K., Sharma, S.and Mittal, V.K. (2017) ‘Optimisation of honing process parameters for reducing surface roughness and power consumption on grey cast iron (FG-260I)’, Int. J. Additive and Subtractive Materials Manufacturing, Vol. 1(1), pp. 67–81.
- Rai Shubham, Prashant S.K, Kumar Anurag, Mishra Rahul, Vates Umesh Kumar and Singh G.K. (2017), “Optimization of Process Parameters in Ti-6Al-4V During CNC Turning” Middle East Journal of Scientific Research, Vol. 25 (5), pp. 939-949.
- Vates. U.K, Singh. G.K, Jain Tanmay (2017), “Change in Microstructure of Heat TreatedTi6Al4V Alloy in Different Temperatures and Strain Rate” Journal of Manufacturing Engineering, Vol. 12(3), pp 174-178.
- Dwivedi Gaurav, Sharma P., Verma P. (2017), “Experimental Investigation of metals and Antioxidants on Oxidation Stability and Cold flow properties of Pongamia Biodiesel and its blends”, International Journal of Renewable Energy and Research, Vol. 7(1), pp. 26-33 (SCOPUS Indexed)
- Tejra Shyam Sunder, Badri Vishal, Udania Himanshu, Dwivedi (2017), “Solar Photovoltaic-Thermal (PV-T) Hybrid Technology: An Indian Perspective” Journal of Energy Research and Environmental Technology, Vol.4 (1), pp.102-106
- Dwivedi G, Sharma Priyanka, Pal Prem, Nandan Gopal (2017), Performance and Emission analysis of Pongamia Biodiesel and its blends in different operating condition- A review, Interdisciplinary Environmental Review, 18(2), pp. 189-200.
- Acharya A and Sharma Richa (2017). “The study of gas turbines and their applications in Aircrafts and Electricity Generation” International Journal of Current Trends in Engineering & Technology, (UGC Approved) Vol. 3(5), pp.275-278.
- Chhabra M, Sharma Ajay, Dwivedi G (2017), “Performance Evaluation of Diesel Engine using Rice Bran Biodiesel”. Egyptian Journal of Petroleum, Vol. 26 (2), 511-518.
- Singh, R. Mazumder, P. Gupta and D. Kumar (2017), “Polymer Assisted Co-Precipitation Route for the Synthesis of Al2O3-13% TiO2 Nanocomposite”, Bulletin of Materials Science, Vol 40 (3), pp 527–535.
- Sindhwani, R., & Malhotra, V. (2017) “A Framework to Enhance Agile Manufacturing System: A Total Interpretive Structural Modelling (TISM) Approach”, Benchmarking: An International Journal, 24 (2), 467-487. (SCOPUS Indexed)
- M, Singh. O (2017), “Investigation for performance enhancement of dual pressure HRSG in gas/steam combined cycle power plants”, International Journal of Ambient Energy, Taylor & Francis, Vol. 38(4), pp.339-346. (SCOPUS Indexed)
- Verma J., Nigam S., Sinha S., Sikarwar B. S. and Bhattacharya A., (2017) Irradiation effect of low energy ion on polyurethane nano coating containing metal oxide nanoparticles, Radiation Effects and Defects in Solids, Vol. 172 (11-12), pp. 964-974 (SCOPUS Indexed)
- Kaushik V. and Mohammad A. (2017), “A mathematical approach to identify the number of distinct mechanism of multiple jointed kinematic chains using concepts of MATLAB”, International Journal of Control Theory and Application, Vol. 10(4), pp. 1-9.
- Panchal D and Kumar D. (2017), “Stochastic behavior analysis of real industrial system”, International Journal of System Assurance Engineering and Management, Vol. 8(2), pp. 1126-1142. (SCOPUS Indexed)
- Singh A. (2017), “Theoretical Investigation on inflow between two rotating disk”, Journal of Fluids Engineering, Vol. 139(11), pp. 111202-111209. (SCOPUS Indexed)
- Jamwal U., Panchal D. and Kumar A. (2017), “Change management in the Indian pharmaceutical industry: a case study”, Int. J. Logistics Systems and Management, Vol. 27(3), pp. xxxx. (SCOPUS Indexed)
- Verma P., Dwivedi G. and Sharma M. P. (2017), “Comprehensive analysis on potential factors of ethanol in Karanjia biodiesel production and its kinetic studies”, Fuel, Vol. 188, pp. 586-594. (SCOPUS Indexed)
- Sekhar T. V. R., Prakash R., Nandan G. and Marisamy H., “Performance enhancement of a renewable thermal energy collector using metallic oxide nanofluids” Micro and Nano Letters, Vol. 13(2), pp. 248-251. (SCOPUS Indexed)
- Kamboj K, Singh Gurpreet, Sharma Rohit, Panchal D, Hira Jaspreet (2016), “Heat Transfer Augmentation In Double Pipe Heat Exchanger by Using Mechanical Tabulators”, International Journal of Heat and Mass Transfer, Vol. 53 (2), pp. 553–567. (SCOPUS Indexed)
- Daniel, Naveen Anand, Singh Nirmak Kumar and Vates Umesh Kumar (2017), “Parametric optimization of steel die & punch in bowl manufacturing”, European Journal of Applied Sciences, Vol. 9(5), pp. 224-233.
- Singla, Rohit and Parthasarathy Harish (2017), “Simple Exclusion Model applied to Nano-Robots”, Robotics and Autonomous Systems, Vol. 96, pp. 15-25. (SCOPUS Indexed)
- Sharma Rakesh Chandmal, Palli Srihari, Sharma Sunil Kumar and Roy Mritunjoy (2017), “Modernization of Railway Tracks with Composite Sleepers”, International Journal of Vehicle Structures & Systems, Vol. 9(5), pp. 321-329.
- Kolbasov, P. Comiskey, R. P. Sahu, S. Sinha Ray, A. L. Yarin, B. S. Sikarwar, D. Attinger (2016), “Blood Rheology in Shear and Uniaxial Elongation” Rheological Acta (Springer), Vol. 55(11-12), pp 901–908. (SCOPUS Indexed)
- Sikarwar, B. S., Roy, M., Ranjan, P. and Goyal, A.(2016), “Automatic Disease Screening Method using Image Processing for Dried Blood”, Journal of Medical Engineering & Technology (Taylor and Francis), Vol. 40(3), 1-10. (SCOPUS Indexed)
- Sikarwar, B.S., and Daoud, A. A (2016), “Modeling Dropwise Condensation Underneath Unidirectional Wettability Graded Surfaces”, ArXiv preprint arXiv:1603.04669 pp 1-20
- Roy, M., Sikarwar, B.S., Prakash, R., Ranjan, P., Goyal, A.(2016), “Parametric Study of Ball and Socket Joint for Bio-Mimicking Exoskeleton”. World Academy of Science, Engineering and Technology, International Science Index, Medical and Health Sciences, V 2(12), pp. 1-20.
- Garg, P. Gupta, D. Kumar and O. Parkash (2016), “Structural and Mechanical Properties of Graphene reinforced Aluminum Matrix Composites”, Journal of Materials and Environmental Science, Vol. 7(5), pp. 1461-1473.
- Lal, D. Mudgal and P. Gupta (2016), “Nanocomposites: Technologically Advanced Material for Wide Engineering Applications”. Journal of Current Nanomaterials, Vol. 1(3), pp. 183-189.
- Gupta , Kumar D., Quraishi M. A. and Parkash O. (2016), “Influence of Processing Parameters on Corrosion Behavior of Metal Matrix Nanocomposites”, Journal of Materials and Environmental Science, Vol. 7(7), pp. 2505-2512.
- Dubey, P. Khosla, H. K. Singh, V. Katoch, D. Kumar & P. Gupta (2016), “A Review on Role of Processing Parameter in Determining Properties of Silicon Carbide Reinforced Metal Matrix Nanocomposites”, Journal of Applied Science and Engineering, Vol. 19(3), pp. 303-312.
- Gupta , Kumar D., Jha A. K. and Prakash O. (2016), “Effect of Height to Diameter (h/d) Ratio on the Deformation Behavior of Fe-Al2O3 Metal Matrix Nanocomposites”, Bulletin of Materials Science, Vol. 39(5), pp. 1245-4258.
- Lal , Mudgal D. and Gupta P. (2016), “Nanocomposites: Technologically Advanced Material for Wide Engineering Applications”. Journal of Current Nanomaterials,” Vol.1 (3), pp. 183-189.
- Chauhan H, Singh Dilpreet, Parmar Vinod, Kalyanasundaram Dinesh, Bhatnagar Naresh (2016), “Laser machining of Kevlar fiber reinforced laminates - Effect of polyetherimide versus polypropylene matrix”, Composites Science and Technology, Vol. 134, 267-274. (SCOPUS Indexed)
- Gupta Himanshu Vates U K, Sharma Shubham, Singh G K and Kumar Vivek (2016), “Optimization of Influencing Drilling Parameters in HSS T1 Using Response Surface Methodology”,Middle-East Journal of Scientific Research, Vol. 24(10), pp. 3067-3077.
- Singh, A. (2016), “Closed Form Solution for Outflow between Corotating Disks”, ASME J. Fluids Eng., 138 (5) 051203-8. (SCOPUS Indexed)
- Singh, A. and Tyagi, R.K.(2016), ''Turbulent Sink Flow between Two Disks”, Journal of Advances and Applications in Fluid Mechanics, 19 (2), pp. 367-377.
- Sindhwani, R., & Malhotra, V. (2016). “Barriers Evaluation for Agile Manufacturing System with Fuzzy Performance Importance Index Approach”. International Journal of Agile System and Management, Vol. 9(5), pp. 292–301. (SCOPUS Indexed)
- Mittal, V.K., Sindhwani, R. & Kapur, P.K. (2016), “Two-way assessment of barriers to Lean-Green Manufacturing System: insights from India”,International Journal of System Assurance Engineering and Management, Vol 7(4), pp. 400–407. (SCOPUS Indexed)
- Sindhwani, R., & Malhotra, V. (2016), “Modelling the attributes affecting design and implementation of agile manufacturing system”,International Journal of Process Management and Benchmarking, 6(2), pp. 216-234. (SCOPUS Indexed)
- Tyagi R.K and Singh, A. (2016), “Turbulent Sink Flow between Two Disc”, Journal of Advances and Applications in Fluid Mechanics, Vol.19 (2), pp. 367-377.
- Tyagi R.K, (2016) A New Device in Catalytic Converter to Reduce Biochemical Effect of Particulate Matter” Der Pharma Chemica, Vol.8 18), pp.72-77.
- Tyagi R., Agarwal, Pulak and Agarwal K M (2016), “A review on quality management system in automotive sector and ISO/TS 16949”, International Journal of Advance Engineering Research and Applications, Vol. 2(8), pp. 525-536.
- Yadav Gajotam and Tyagi R. (2016), “Assembly Line Improvement with in the Automotive Industry”, International Journal of Advance Research and Innovation, Vol. 4 (2), pp. 474-477.
- Tyagi R.K., Manthan K., Verma A., Sharma M. and Bhandwal M. (2016), “Effect of Creating Turbulence on the Effectiveness of Catalytic Converter”, International Journal of Performability Engineering, Vol.12 (2), pp. 115-120. (SCOPUS Indexed)
- Tyagi R.K., Manthan K., Verma A., Sharma M and Bhandwal M. (2016), “The effect of using the turbulence enhancement unit before catalytic converter in diesel engine emission”, International Journal of Ambient Energy, 39(1), pp. 73-77. (SCOPUS Indexed)
- Sharma M. and Singh O. (2016), “Thermodynamic Impact Analysis of Parametric Variations in Dual Pressure HRSG for Gas/Steam Combined Cycle Power Plants”, ISST Journal of Mechanical Engineering (IJME), 7(1), pp. 6-14.
- Sharma M. and Singh O. (2016), “Exergy Analysis of Dual Pressure HRSG for Different Dead States and Varying Steam Generation States in Gas/Steam Combined Cycle Power Plant”, Journal of Applied Thermal Energy, 93, pp. 614–622. (SCOPUS Indexed)
- Sharma M. and Singh O. (2016), “Exergy based parametric evaluation of Heat Recovery Steam Generator (HRSG)”, Heat Transfer -Asian Research, 45(1), pp. 1-14.
- Dhurandher B. Kumar Ravi Dhiman Amit K. Gupta Akhilesh andSharma Pavan K. (2016), “An experimental study of vertical centerline temperature and velocity profile of buoyant plume in cubical compartment”, J. Braz. Soc. Mech. Sci. & Eng, Vol. 39 (5), pp. 1813–1822.
- Shukla, R. K., Dixit, G., and Agarwal, A. (2016), “Modelling Supply Chain Coordination in Fuzzy Environment”, International Journal of Business Performance and Supply Chain Modelling (IJBPSCM), Vol. 8(2), p 130-156. (SCOPUS Indexed)
- Shukla, R. K., Dixit, G., and Agarwal, A, (2016). “Coordination Practices in Supply Chain Management: An Empirical Study of Indian Manufacturing Firms”, Journal of Management Research, Vol. 16 (1), pp.44-54.
- Kumar Vikas and Saran H. (2016), “Seat-to-head transmissibility and reading discomfort of the seated subjects exposed to whole body vibration”, International Journal of Acoustics and Vibration, Vol. 21 (1), pp. 67-74. (SCOPUS Indexed)
- Kumar U. J. P., Gupta P., Jha A. K. and Kumar (2016), “Closed Die Deformation Behavior of Cylindrical Iron–Alumina Metal Matrix Composites During Cold Sinter Forging”, Journal of The Institution of Engineers (India): Series D, Vol. 97(2), pp. 135-151. (SCOPUS Indexed)
- Srivastava, P. (2016), ‘Line balancing heuristic for productivity enhancement in beverage factory’, Indian Journal on Science & Technology, Vol. 9 (36), pp. 1-9.
- Verma P., Sharma M.P. and Dwivedi G. (2016), “Prospects of bio-based alcohols for Karanja biodiesel production: An optimisation study by Response Surface Methodology”, Fuel, Vol. 183, pp. 185–194. (SCOPUS Indexed)
- Verma P., Sharma M.P., Dwivedi G. (2016), “Comprehensive analysis on potential factors of ethanol in Karanja biodiesel production and its kinetic studies” Fuel, Vol. 188, pp. 586-594. (SCOPUS Indexed)
- Chhabra M., Sharma Ajay and Dwivedi G. (2016), “Performance Evaluation of Diesel Engine using Rice Bran Biodiesel”, Egyptian Journal of Petroleum, Vol. 26(2), 511-518.
- Dwivedi G., Sharma M.P. and Verma P. (2016), “Impact of Oil and Biodiesel on Engine operation in Cold Climatic condition” Journal of Material and Environmental Science, V 7 (12), pp. 4540-4555.
- Sharma, R., Singh, J. and Rastogi, V. (2016), “Importance and effectiveness of human related issues in implementing total productive maintenance: a study of Indian manufacturing organizations”, International Journal of Industrial and Systems Engineering, 23(4), pp. 420-434. (SCOPUS Indexed)
- Dangayach, G. S., Bhatt, H., Gupta, S., & Meena, M. L. (2016), “Machine Layout Design through Particle Swarm Optimization in Indian Industry”, Productivity, 57(1), pp. 13-31.
- Jain, P., Gupta, S., Meena, M.L., & Dangayach, G.S. (2016), “Optimization of Labour Productivity using Work Measurement Techniques”, International Journal of Productivity and Quality Management, 19 (4), pp. 485-510. (SCOPUS Indexed)
- Singhal P., Gupta, S., Dangayach, G. S., Singh, A.K., Meena, M. & Rao, P. L. (2016), “Sustainable Design and Life cycle assessment of Connecting Rod for Material Optimization”, Journal of Energy and Environmental Sustainability, Vol. 2, pp. 36-42.
- Vates U. K., Singh, N. K. and Singh, R.V., (2016). “Modeling and optimization of wire electrical discharge machining process on D2 steel using ANN and RMSE approach”, Int. J. Computational Materials Science and Surface Engineering, Vol. 6(3/4), pp.161–185. (SCOPUS Indexed)
- Gupta Gaurav, Kaushik Dhruv, Mathur Kushagra, Pal Rajarshi and Bhatnagar, Pratishrut (2016), “Power Generation through Wind Turbine in Locomotives & validation of performance parameters for a Bi-Directional Wind Turbine: Wells Turbine”, International Journal of Engineering Technology, Management and Applied Sciences, Vol. 4(4), pp. 366 – 376.
- Gupta Gaurav, Gattani Gaurav, Samuel Jerin, Ratan Rakshit and Bhardwaj Shivank (2016), “Unconventional Energy Harness: A Review on Developments of Solar Power based Multipurpose Refrigerator”, International Journal of Engineering Technology Science and Research, Vol. 3(4), 246 – 252. DOI: 10.13140/RG.2.1.3038.3604
- Gupta Gaurav, Haider Syed Nasir, Tiwari Abhishek, Manas Kushagra and Kumar Shyam Krishna (2016), “Harnessing Energy from Waste Heat of Engine Using Peltier Effect”, International Journal of Engineering Technology Science and Research, Vol. 3(5), 212 – 221.
- Aggarwal Vansh, Saini Ankit, Singh Akash, Jadia Shubhang and Gupta Gaurav (2016), “A Review on Manual Assisted Gravity Pendulum Lamp” International Journal of Engineering Technology, Management and Applied Sciences, Vol. 4(5), pp. 112-116. DOI: 10.13140/RG.2.1.4185.2403
- Vislavath S., Srivastava P., Aziz M. and Sharma A. (2016), “Line balancing heuristics for productivity enhancement in beverage factory”, Indian Journal of Science and Technology, Vol. 9 (36), pp. 1-9. DOI: 10.17485/ijst/2016/v9i36/102599.
- Sikarwar B. S., Bhadauria A. and Ranjan P. (2016), “Towards an analytical model for film cooling prediction using integral turbulent boundary layer”, IJE Transactions A: Basics, Vol. 29(4), pp. 554-562.
- Sindhwani, R., & Malhotra, V. (2016), “Modelling and analysis of agile manufacturing system by ISM and MICMAC analysis”, International Journal of System Assurance Engineering and Management, Vol. 8(2), pp. 253-263. (SCOPUS Indexed)
- Patil M., Joshi A., Sharma V. and Kaushik V. (2016), “Analyzing the performance of a formula type race car using lap times simulation”, Indian Journal of Science and Technology, Vol. 9(39), pp. 1-14. DOI: 10.17485/ijst/2016/v9i39/94146
- Sikarwar, B. S., Roy, M., Ranjan., Goyal, A. (2015) , “Automatic Pattern Recognition for Detection of Disease from Blood Drop Stain obtained with Microfluidic Device”, Journal of Advance Intelligent & Computing System, Springer, Vol. 425, pp. 655-667.
- Sikarwar B.S., Shukla R.K., Sharma S.K. (2015), “Experimental Study for Investigating the Mechanism of Heat Transfer near the Critical Heat Flux in Nucleate Pool Boiling”, International Journal of Engineering, Vol. 28(8), pp. 1241-1250.
- Sikarwar B.S., Khandekar S., Muralidhar K. (2015), “Dropwise Condensation of Metal Vapors Underneath Inclined Substrates”, Interfacial Phenomena and Heat Transfer, Vol. 3(1), pp. 85-113.
- Qin Y., Xiong D., Li J., Tyagi R. (2015), “Corrosion and bio-tribological properties of Ti (CN) x hard coating on titanium alloy by the pulsed plasma electrolytic carbonitriding process”, Tribology International, Vol. 82, pp. 543-550.
- Sharma S K, Goyal P, Tyagi R K (2015), “Conversion efficiency of catalytic converter”, International Journal of Ambient Energy, Vol. 37(5), pp. 507-512.
- Sangwan K.S., Mittal V. K. (2015), “A bibliometric analysis of green manufacturing and similar frameworks”, An International Journal of Management of Environmental Quality, Vol. 6(4), pp. 566-587.
- Mittal V. K., Sangwan K.S. (2015), “Ranking of Drivers for Green Manufacturing Implementation Using Fuzzy Technique for Order of Preference by Similarity to Ideal Solution Method”, Journal of Multi‐Criteria Decision Analysis, Vol. 22 (1-2), pp. 119-130.
- Sindhwani R., Singh P. L., Kartik (2015), “Decision Making In Recruitment Process With AHP And ANP” International Journal of Advance Research In Science And Engineering, Vol. 4 (1), pp. 82-93.
- Agarwal K.M., Chhabra M. (2015), “Study of performance parameters of single cylinder four stroke spark ignition engine using gasoline - Ethanol Blends”, International Journal of Technology Enhancements and Emerging Engineering Research, Vol.3 (2), pp.44-46.
- Kaushik S., Kumar M., Thakur S., Chhabra M., Aggarwal K. M. and Tyagi R. K. (2015), “Biodiesel production & its performance characteristics measurement: A review and analysis”, Journal of Chemical and Pharmaceutical Research, Vol.7(5), pp.1075-1082.
- Sharma A., Sharma S. (2015), “Investigation of Wear Characteristics of Aluminum Disc with Pin on Disc Tribometer”, International Journal of Scientific & Engineering Research, Vol.6 (1), pp. 1932-1939.
- Sharma Ajay (2015), “Gas Turbines- Current Scenario & Future Prospects in India”, International Journal of Scientific & Engineering Research, Vol. 6 (8), pp. 867-876.
- Daniel N. A., B, Singh N.K., C. and Vates U.K. (2015), “Parametric Optimization & Simulation of Mild Steel Cup In Deep-Drawing Using LS-Dyna”, International Journal of Applied Engineering Research, Vol.10 (9), pp.24479-24489.
- Roy M. K, A. Goyal. Kumar V. (2015), “Ecoflush - waste water recycling and rain water harvesting toilet flush system”, Advance Research in Mechanical Production Industrial Engineering, Vol.1, pp.141-143.
- Sharma, O. Singh (2015), “Exergy Based Parametric Analysis of a Heat Recovery Steam Generator”, Journal of Heat Transfer Asian Research, Vol.45 (1), pp.1-14.
- Kumar R., Singh R.K., Shankar R. (2015), “Critical success factors for implementation of Supply Chain Management in Indian SMEs and their impact on performance”, IIMB Management Review, Vol.27 (2), pp.92-104.
- Lata S., Kumar R., Rana R. (2015), “Experimental Research on MRR in EDM Process Using Regression Modelling”, International Journal of Modern Engineering Research, Vol. 5 (10), pp.81-88.
- Kumar R., R. Rana Kumar, Lata S. (2015), “Optimization of process parameters on Over-Cut in drilling of Al-B4C MMC”, International Journal of Modern Engineering Research, Vol.5 (6), pp.24-30.
- Kumar A., kumar R., Duhan R., Duhan S (2015), “Lean Manufacturing Methodology with Kaizen Improves Quality in Small Scale Industry in India”, International Journal of Modern Engineering Research, Vol.5 (7), pp.33-42.
- Soni S, Kumar R, Duhan R, Duhan S (2015), “Quality Circle: A Methodology to Identify Scope of Quality Improvement through Kaizen Approach”, International Journal of Modern Engineering Research, Vol.5(7), pp.43-51.
- Jha P., Gupta P., Kumar D., Prakash Om (2015), “Effect of Sintering Mechanism on the Properties of ZrO2 Reinforced Fe Metal Matrix Nanocomposite”, Journal of Composites, Vol. 2015, pp. 1-8.
- HiraJaspreet, Mangal S. K., Manna A. (2015), “Fabrication of Hybrid Mg/(Al2O3p+ SiCp + Grp) Metal Matrix Composite on Developed Gas Injection Liquid Stir Casting Setup”, Arabian Journal for Science and Engineering, Vol. 40 (9), pp. 2729-2738.
- Sharma R, Singh R (2015), “Work-Related Musculoskeletal Disorders, Job Stressors and Gender Responses in Foundry Industry” International Journal of Occupational Safety and Ergonomics, Vol. 20 (2), pp. 363-373.
- Mudgal D, Singh S, Prakash S (2015), “Evaluation of Ceria-Added Cr3C2-25 (NiCr) Coating on Three Superalloys under Simulated Incinerator Environment”, Journal of Thermal Spray Technology, Vol. 24 (3), pp. 496-514.
- Mudgal D, Singh S, Prakash S (2015), “Cyclic Hot Corrosion Behavior of Superni 718, Superni 600, and Superco 605 in Sulfate and Chloride Containing Environment at 900° C”, Journal of Metallography, Microstructure, and Analysis, Vol. 4 (1), pp. 13-25.
- Mudgal D, Singh S, Prakash S (2015), “Hot Corrosion Behavior of Bare, Cr3C2-(NiCr) and Cr3C2-(NiCr) + 0.2 wt.% Zr Coated SuperNi 718 at 900° C”, Journal of Materials Engineering and Performance, Vol. 24(1), pp. 1-15.
- Sharma Sumit, Sharma Ajay and Sharma Megha (2015), “Gas Turbines- Current Scenario & Future Prospects in India”, International Journal of Scientific & Engineering Research, Vol. 6(8), pp. 867-876.
- Sindhwani R., Malhotra V., (2015). “Agile Manufacturing Through Management Driver”, International Journal of Advanced Research in Engineering and Technology (IJARET); Vol. 6 (4), pp.34-40.
- Sindhwani R., Malhotra V., (2015), “Twenty Criteria Agile Manufacturing Model” International Journal of Emerging Technology and Advanced Engineering; ISSN 2250-2459, Vol. 5(1), pp. 1-12.
- Sindhwani R, Malhotra Vasdev; “Lean and Agile Manufacturing System Barriers” International Journal of Advance Research and Innovation; Vol. 3(1), pp 110-112
- Sindhwani R., Singh Punj L, Singh K. (2015), “Decision Making in Recruitment Process with AHP And ANP”, International Journal of Advance Research In Science And Engineering, Vol. 4(1), pp 82-93.
- Tyagi R K. (2015), “The Effect of Angle of Impact and Flow Quantity on output Power of Impulse Water Wheel Model”, Journal of Energy in Southern Africa, Vol. 26(3), pp. 100-104.
- Tyagi R.K., Goyal P., Sharma K. (2015), “Conversion Efficiency of Catalytic Converter”, International Journal of Ambient Energy (Tayler and Francis Journal), Vol 37 (5), pp. 507-512.
- Tyagi R.K., Sharma K., CHANDRA A., Goyal P., Mahesavari S.( 2015), “Improved intake manifold designs for Emission Control.” Journal of Engineering Science and Technology, Vol. 10 (9), pp. 1188-1202.
- Tyagi R.K., Goyal , Sharma S. K., Mahesavari S. ( 2015), “Change in Efficiency by Reusing a Dialyzer” International Journal of Applied Engineering Research (IJAER), Vol.10 (2), pp. 2513-2521.
- Tyagi R.K (2015), “A Technical Review on Engineering Applications of Nitinol” International Journal of Applied Engineering Research (IJAER), 10(1), pp. 589-618.
- Tyagi R. K., Goyal P., Sharma S. K. (2015), “Evaluation of Methanol Gasoline Fuel Blends on Exhaust Emission of Single Cylinder Spark Ignition Engine” Iranica Journal of Energy and Environment, 6 (3), pp. 161-166.
- Tyagi R.K., Manthan K., Verma A., Sharma M., Bhandwal. (2015), “An effective parabolic solar collector” Iranica Journal of Energy and Environment, 6 (4), pp. 269-273.
- Tyagi R K, Kaushik S., Kumar M., Thakur S., Chhabra M, Aggarwal K. M. (2015), “Biodiesel Production & its Performance Characteristics Measurement: A Review and Analysis”, Journal of Chemical and Pharmaceutical Research, Vol.7 (5), pp. 1075-1082.
- Tyagi R. K, Chabra Mayank, Agarwal K M (2015), “Reduction of Harmful gases by using biodiesel fuel” Journal of Chemical and Pharmaceutical Research, Vol.7 (6), pp.1-15.
- Tyagi R. K., Priyanka G., Santosh S. ( 2015), “Hydrogen Fuelled Internal Combustion Engine: A Review of Technical Feasibility” International Journal of Performability Engineering, 11(5), pp. 403-415.
- Tyagi R. K, Malhotra J, Bhandwal M, Kalia A, Pandey S, Rahul A. (2015),
“Ecofriendly catalytic converter to reduce biochemical effect of exhaust gases.” Der Pharma Chemica, Vol.7 (12), pp. 56-61. - Tyagi R K., Mohit R., Shekher S., Agarwal P., Bansal S, Srivastava P. (2015), “Development of Design of Motor using one Way Nitinol”. Archives of Applied Science Research. Vol.7(4). pp. 64-67.
- Tyagi R K., ManthanK., Verma , Sharma M. (2015), “Kinematic analysis of Automated Elliptical Trammel for cutting applications.” Archives of Applied Science Research. Vol.7(5). pp. 97-101.
- Sikarwar, B. S., Shukla, R. K., & Sharma, S. K. (2015), “Experimental study for investigating the mechanism of heat transfer near the critical heat flux in nucleate pool boiling”, International Journal of Engineering-Transactions B: Applications, 28 (8), pp.1241-1250.
- Shukla, R. K., Dixit, G., and Agarwal, A. (2015), “Supply Chain Coordination: A Theoretical Framework” Industrial Engineering Journal, Vol. 7(10), pp. 23-26.
- Mishra A., Chellapandi P., Kumar R. Suresh and G. Sasikala (2015). “Effect of frequency of free level fluctuations and hold time on the thermal ratcheting behavior”. International Journal of Pressure Vessels and Piping. 129–130, pp. 1–11.
- Mishra , Chellapandi P., Kumar R. Suresh and G. Sasikala (2015). “Effect of Temperature Rate Term while Predicting Thermal Ratcheting of a Thin Cylinder due to Cyclic Temperature Variation.” Transactions of the Indian Institute of Metals., Vol. 68 (2), pp. 161-169.
- Mishra , Chellapandi P, Kumar R. Suresh and G. Sasikala (2015). “Comparative study of cyclic hardening behavior of SS 316L using time independent and dependent constitutive modeling: A simplified semi-implicit integration approach.”. Transactions of the Indian Institute of Metals.; Vol. 68, pp. 623-631.
- Sharma, R., Singh, J. (2015), “Impact of implementing Japanese 5S practices on Total Productive Maintenance”. International journal of current engineering and technology, Impact factor (6.125), 5(2), pp. 818-825.
- Gupta, S., Dangayach, G. S. & Singh, A. K. (2015), “Key Determinants of Sustainable Product Design and Manufacturing”. Journal of Procedia CIRP, 26, pp. 99-102.
- Gupta, S., Dangayach, G. S., Singh, A. K., & Rao, P. N. (2015), “Analytic Hierarchy Process (AHP) Model for Evaluating Sustainable Manufacturing Practices in Indian Electrical Panel Industries”. Procedia-Social and Behavioral Sciences, 189, pp. 208-216. Elsevier Publication.
- P., Gupta, S., & Dangayach, G. S. (2015), “Sustainable Waste Management: A Case from Indian Cement Industry”, Brazilian Journal of Operations & Production Management, Vol. 12(2), pp.270-279.
- Tyagi R.K., Ranjan R. (2015), “Effect of Heating Catalytic Converter on Emission Characteristic of Gasoline Automotive Vehicles”, International Journal of Ambient Energy, 36 (5), pp. 235-241.
- Tripathi, B. N., Singh, K. and Vates, U. K., (2015). “Ra Modeling & Optimization of Honda Bike Cylinder Liner in Honing using RSM & RMSE Technique”, International Journal of Applied Engineering Research, Vol. 10 (8), pp. 78-83. (Scopus Indexed).
- Tripathi, B. N., Singh, N. K. and Vates, U. K., (2015). “Surface roughness influencing process parameters & modeling techniques for four stroke motor bike cylinder liners during honing: Review”, International Journal of Mechanical & Mechatronics Engineering, Vol. 15(1), pp. 36-44. (Scopus Indexed)
- Tyagi R.K., Ranjan R. (2015), “Emission Characteristic of Hydrogen and Gasoline Blend in S.I” International Journal of Ambient Energy (Tayler and Francis Journal). Vol 38 (1), pp. 14-18. (SCOPUS Indexed)
- Rana G. R., Sikarwar B. S., Khandekar S., Panigrahi P. K. (2014), “Hydrodynamics of a Confined Meniscus in a Square Capillary Tube at Low Capillary Numbers”, Frontiers in Heat Pipes, Vol. 5 (1), pp. 148-149.
- Sharma A., Jhunjhunwala S. (2014), “New Technologies Used In Automotive Exhaust Systems : Review”, International Journal Of Mechanical Engineering And Technology, Vol.5 (9), pp. 293-305.
- Gandhi A., Asija N., Chauhan H., Bhatnagar N. (2014), “Ultrasound Induced Nucleation in Microcellular Polymers”, International journal of Applied Polymer Science, Vol.131 (18), pp. 9076-9080.
- Gebremeskel S.A., Asija N., A. Priyanshu, Chouhan H., Bhatnagar N. (2014), “Design Customization and Development of Split Hopkinson Pressure Bar for Light and Soft Armour Materials”, Global Jr. of Res in Engg. (A), Vol. 14 (7), pp. 62-75.
- Sharma M., Singh O. (2014), “Parametric Evaluation of Heat Recovery Steam Generator (HRSG)”, Heat Transfer Asian Research, Vol. 43, pp. 691.
- Mittal V.K., Sangwan K.S. (2014), “Prioritizing Barriers to Green Manufacturing: Environmental, Social and Economic Perspective”, Elsevier - Procedia CIRP, Vol. 17, pp. 559-564.
- Mittal V.K., Sangwan K.S. (2014), “Fuzzy TOPSIS method for ranking barriers to environmentally conscious manufacturing implementation: government, industry and expert perspectives”, International Journal of Environmental Technology and Management, Vol. 17 (1), pp. 57-82,
- Kumar R., Singh R.K, Shankar R (2014), “Strategy development by Indian SMEs for improving coordination in Supply chain: An Empirical study”, Competitiveness Review, Vol. 24 (5), pp. 414-432.
- Mittal V.K., Sangwan K.S. (2014), “Development of a structural model of environmentally conscious manufacturing drivers”, Journal of Manufacturing Technology Management, Vol. 25 (8), pp. 1195-1208.
- Mittal V.K., Sangwan K.S (2014), “Modeling drivers for successful adoption of environmentally conscious manufacturing”, Journal of Modelling in Management, Vol. 9 (2), pp. 127-140.
- Mittal V.K., Sangwan K.S (2014), “Development of a model of barriers to environmentally conscious manufacturing implementation”, International Journal of Production Research, Vol. 52 (2), pp. 584-594.
- Gupta P., Prakash Om, Jha A. K., Kumar D. (2014), “Sintering and Hardness Behavior of Fe-Al 2 O 3 Metal Matrix Nanocomposites Prepared by Powder Metallurgy”, Journal of Composites, Vol. 2014, pp. 1-10.
- Kumar S, Mudgal D, Singh S, Prakash S (2014), “Effect of CeO 2 in Cr 3 C 2-NiCr Coating on Superni 600 at High Temperature”, Procedia Materials Science, Vol. 6, pp. 939-949.
- Mudgal D, Kumar S, Singh S, Prakash S (2014), “Corrosion Behavior of Bare, Cr3C2-25%(NiCr), and Cr3C2-25%(NiCr) + 0.4% CeO2-Coated Superni 600 Under Molten Salt at 900° C”, Journal of Materials Engineering and Performance, Vol. 23(11), pp. 3805-3818.
- Mudgal D, Singh S, Prakash S (2014), “Corrosion Problems in Incinerators and Biomass-Fuel-Fired Boilers”, International Journal of Corrosion, Vol. 2014, pp. 1-14.
- Mudgal D, Singh S, Prakash S (2014), “Hot corrosion behavior of some superalloys in a simulated incinerator environment at 900 C”, Journal of materials engineering & performance, Vol. 23(1), pp. 238-249.
- Yadav A, Kumar G, Soboyejo ABO, Gaur RS, Tiwari S (2014), “Empirical models for change in pH and temperature within gravity-based reactor columns”, Desalination & Water Treatment, Vol. 55, (12), pp. 3195-3209.
- Shishay Amare Gebremeskel, Asija Neelanchali, Chouhan Hemant, Bhatnagar Naresh (2014), “Design customization and development of SHPB for light and soft armour materials”, Global Jr. of res. in Engg., Vol. 14 (7), pp. 62-75.
- Sindhwani Rahul, Singh Punj (2014), “Design of Electric Bike with Higher Efficiency”, International Journal of Advance Research and Innovation, Vol. 1, pp. 247-251.
- Tyagi R.K. (2014), “A Review of Few Unconventional Machining Process based on the concept of Velocity Shear Instability in plasma”, Production and Manufacturing Research,3(2), pp.41-49.
- Tyagi R.K., Ranjan R. (2014), “Performance Studies on Flat Plate Solar Air Heater subjected towards Flow Patterns”, Applied Solar Energy (Springer Journal), Vol. 50 (2), pp. 98-102.
- Tyagi R.K . (2014), “A Review on welding/cutting with and without Velocity Shear Instability in plasma”, Journal of Machinery Manufacturing and Automation. Vol. 2 (1), 216-227.
- Ranjan R., Bajpai P.K., Tyagi R.K. (2014), “Mechanical Characterization of Banana/Sisal Fibre Reinforced PLA Hybrid Composites for Structural Application”, Engineering International,1 (1), pp. 39-49.
- Srivastav Ayushman, Patil A K, Nandan Gopal (2014), “Investigation of heat transfer and friction in rib roughened fin under forced convection,” International Journal of Advanced Technology & Engineering Research, Vol. 4 (1), pp. 1-13.
- Shukla, R. K., Dixit, G., and Agarwal, A. (2014), “Integration of Fuzzy AHP and Fuzzy TOPSIS for Evaluating Trading Partners for Supply Chain Coordination”, Production and Manufacturing Research [Taylor and Francis], Vol. 2(1), pp. 415-437.
- Mishra A., Kumar R. Suresh, Chellapandi P. (2014). “Progressive deformation behaviour of thin cylindrical shell under cyclic temperature variation using Combined Hardening Chaboche Model” Latin American Journal of Solids and Structure, Vol. 11 (6), pp. 980-992.
- Mishra A., Kumar R. Suresh, Sasikala G., Chellapandi P. (2014), “Influence of the frequency of level fluctuations with reference to progressive deformation of thin cylindrical shell”, Procedia Engineering, Vol. 102, pp. 95-102.
- Mishra A., Kumar R. Suresh, Chellapandi P. (2014), “Time dependent ratcheting of thin cylindrical shell due to axial temperature variation using visco-plastic model”, International Journal of Engineering and Technology, Vol. 6, pp. 234-237.
- Misra Sheelam (2014), “Analytical solution of spherical solidification problems by approximate method”, International Journal of Advanced Information Science and Technology, Vol.26 (1), pp. 1-20.
- Singh, J., Rastogi, V. and Sharma, R. (2014), “Implementation of 5S practices: A review”, Uncertain supply chain management, Vol. 2(3), pp. 155-162.
- Shukla, R. K., Dixit, G., and Agarwal, A. (2014), “Integration of Fuzzy AHP and Fuzzy TOPSIS for Evaluating Trading Partners for Supply Chain Coordination”, Production and Manufacturing Research [Taylor and Francis], Vol. 2(10), pp. 415-437.
- Gandhi Abhishek, Asija Neelanchali, Chauhan Hemant, Bhatnagar Naresh (2014), “Ultrasound-Induced Nucleation in Microcellular Polymers”, J. of Applied Polymer Science, Vol. 131(18).
- Sharma Ajay, Kumar Abhishek (2012),” Application of Piezoelectric Device in Automotive Control Going towards Hybridization”, International Journal of Mechanical Engineering Research, Vol. 2 (3), pp. 217-222.
- Yadav, Ashok Kumar, Singh, Shatrughan, Gupta, Gaurav, and Ghosh, Uttam (2014), “Generation of Electricity Through Staircase”, Advanced Science Letters, Vol. 20 (7-9), pp. 1303-1306.
- Yadav, Ashok Kumar, Singh, Shatrughan and Gupta, Gaurav, (2014), “Solar Air-Conditioning: Design for a compressor-less system using Peltier effect” International Journal of Advance Research and Innovation, Vol. 2(2) pp. 429-432.
- Yadav, Ashok Kumar, Singh, Shatrughan, Ghosh, Uttam and Gupta, Gaurav, (2014), “Design and Manufacturing of Honing Tool for Drilling Machine” International Journal of Advance Research and Innovation, Vol. 2(2), pp. 433-435.
- Yadav, Ashok Kumar, Singh, Shatrughan, Gupta, Gaurav and Ghosh, Uttam (2014), “Generation of Electricity Through Staircase” Advanced Science Letters, Vol. 20(7-9), pp.1303-1306. https://doi.org/10.1166/asl.2014.5512
- Sikarwar, B. S., Khandekar S. and Muralidhar K.(2013), “Effect of drop shape on heat transfer during dropwise condensation underneath inclined surfaces”, Interfacial Phenomena and Heat Transfer, Vol.1(4), pp. 339-356.
- Sikarwar, B. S., Khandekar S. and Muralidhar K.(2013), “Mathematical modeling of dropwise condensation on textured surfaces”, Sadhana, Special Issue: Multi-phase flows with Phase-change, Springer Vol. 38 (6), pp. 1135–1171.
- Sikarwar B. S., Khandekar S. and Muralidhar K. (2013), “Simulation of flow and heat transfer inside a liquid drop sliding underneath a hydrophobic surface”, International Journal of Heat and Mass Transfer, Vol. 57 (2), pp. 786-811.
- Kumar R., Singh R.K, Shankar R (2013), “Study on Coordination Issues for Flexibility in Supply Chain of SMEs: A Case Study”, Global Journal of Flexible Systems Management, Vol.14 No.2, pp. 81-92.
- Jha S.K., Sharma Ajay (2013), “Optimal Automobile Muffler Vibration And Noise Analysis”, International Journal of Automotive and Mechanical Engineering (IJAME), Vol. 7, pp. 864-881.
- Mittal V.K., Sangwan K.S. (2013), “Assessment of hierarchy and inter-relationships of barriers to Environmentally Conscious Manufacturing Adoption”, World Journal of Science, Technology and Sustainable Development, Vol.10 (4), pp.297-307.
- Garg R. K., Ojha K. (2013), “Parametric Optimization of PMEDM Process with Chromium Powder Suspended Dielectric for Triangular Electrodes” Advanced Materials Research, Vol. 816, pp. 23-27.
- Singh P. J., Mittal V.K., Sangwan K.S. (2013), “Development and validation of performance measures for environmentally conscious manufacturing”, International Journal of Services and Operations Management, Vol. 14 (2), pp. 197-220.
- Gupta P, Kumar D, Quraishi M A, Parkash O. (2013), “Effect of cobalt oxide doping on the corrosion behavior of iron-alumina metal matrix nano composites”, Advanced Science, Engineering and Medicine, Vol. 5 (12), pp. 1279-1291.
- Gupta P., Kumar D., Parkash O. and Jha A. K. (2013), “Effect of sintering on wear characteristics of Fe-Al2O3 metal matrix composites”, Journal of Engineering Tribology, Vol. 228 (3), pp. 362-368.
- Gupta P, Kumar D, Parkash O, Jha AK (2013), “Structural and mechanical behaviour of 5% Al2O3-reinforced Fe metal matrix composites (MMCs) produced by powder metallurgy (P/M) route”, Bulletin of Materials Science, Vol. 36 (5), pp. 859-868.
- Kumar S, Mudgal D, Singh S, Prakash S (2013), “Cyclic oxidation behavior of bare and Cr3C2-25 (NiCr) coated super alloy at elevated temperature”, Adv. Mater. Lett, Vol.4 (10), 754-761.
- Sindhwani R, Malhotra V, (2013) “Overview And Drivers Of Agile Manufacturing System: A Review”, International Journal of Marketing and Technology, Vol. 3 (12), pp. 144-154.
- Tyagi R. K. (2013), “Theoretical Analysis of Silicon Roughness induced by Plasma Etching”, Surface Engineering and Applied Electrochemistry, Vol. 49 (1), pp. 78-82.
- Tyagi R. K., Verma M. K. (2013), “An Innovative Approach for Automatic Car Cover”, International Journal of Innovative Research in Science, Engineering and Technology, Vol.2(9), pp. 4825-4829.
- Tyagi R.K., Ahmad A., Haque Nizayul S.,Mallick Sahil L., Mehta I., Verma M K. (2013), “The Mechanism and Kinematics of a Pantograph Milling Machine”. European Journal of Applied Engineering & Scientific Research. Vol.2 (3), pp.1-5.
- Tyagi R.K., Jha M., Gupta G. (2013), “Reduction of Rejected Components in an Automobile Assembly line using Quality Tools”. European Journal of Applied Engineering & Scientific Research. Vol.2 (3), pp.13-17.
- Tyagi R.K. (2013), “An Innovative Approach for Cold Spray Technology”, Asian Journal of Current Engineering and Maths, Vol.2 (5), pp. 342-344.
- Tyagi R. K., Chendil V. (2013), “New Model Process Development and Cycle Time Achievement for Closer Line Door Assembly”. Asian Journal of Management. Vol.4 (3), pp. 137-140.
- Tyagi R. K., Verma M. K. (2013), “Study of Specific Power input and Mass Transfer Coefficient in Aeration of Volatile Organic Compounds”, International Journal of Water Resources and Environmental Engineering (Academic Press), Vol.5 (3), pp. 141-145.
- Tyagi R.K., Ranjan R. (2013), “Effect of hydrogen and gasoline fuel blend on the performance of SI engine”, Journal of Petroleum Technology and Alternative Fuels, Vol.4 (7), pp.125-130.
- Tyagi R. K., Verma M., Jha M. (2013), “Comparative study of exhaust emission of commonly used fuel in an internal combustion engine”, Journal of Environmental Science, Computer Science& Engineering Technology, Vol.2 (1), pp. 52-56.
- Tyagi R. K, Velan C., Nandi S. (2013), “Effect of Different Types of Alternative Fuel Type on Air Pollution”, Journal of Environmental Science, Computer Science & Engineering Technology, Vol.2 (3) pp. 534-540.
- Tyagi R.K., Sukanya B. (2013), Survey on Water Cooling System Failure Analysis for Diesel Electric Locomotives. International Journal of Advance Research and Innovation, Vol.2 (2), pp. 12-24.
- Tyagi R.K., Aftab A., Swet C. (2013), “Solar Tracker Mounted Battery Electric Vehicle”. International Journal of Advance Research and Innovation, Vol.2 (2), pp. 6-11.
- Misra S. (2013), “Analytical Solution of Solidification Problems by Approximate Method, International Journal of Mechanical Engineering, Vol. 3(7), pp. 219-222.
- Shukla, R. K., Dixit, G., Agarwal A., (2013), “Modelling Supply Chain Coordination: An Application of Analytic Hierarchy Process under Fuzzy Environment” International Journal of Supply Chain Management, 2(4), pp. 32-41.
- Shukla, R. K., Dixit, G., Agarwal A. (2013), “Supply Chain Coordination Competency and Firm Performance: An Empirical Study” International Journal of Supply Chain Management, 2(4), pp.64-70.
- Singh, J., Rastogi, V. and Sharma, R. (2013). Total productive maintenance review: A Case study in automobile manufacturing industry. International Journal of Current Engineering and Technology, 3(5), pp. 2010-2016.
- Singh, Shatrughan, Yadav, K., Gupta, Gaurav and Kumar, Ajay, (2013), “Design and fabrication of a prototype of hovercraft” International Journal of Engineering Research and Techonology, Vol. 6 (9), pp. 1 – 5.
- Sikarwar B. S., Khandekar S., Agrawal S., Kumar S. and Muralidhar K. (2012), “Dropwise condensation studies on multiple scales”, Heat Transfer Engineering, Special Issue: Advances in Heat Transfer, Taylor and Francis, Vol. 33 (3/4), pp. 301-341.
- Tyagi R. , Verma M K. (2012), “Aeration of volatile organic compounds using gas dispersion impellers”, Journal of Mechanical Engineering and Research (Academic Press), Vol. 4(7), pp. 213-224.
- Tyagi R. K., Kumar A., Pandey R.S. (2012), “Heat Flux and Plasma Parameters in Plasma Welding By Means of Velocity Shear Instability”, Journal of Engineering and Technological Research (Academic Press). Vol. 4(4), pp. 65-70.
- Tyagi R. (2012), “Effect of different plasma parameters on plasma energy by means of velocity shear instability”, European Journal of Applied Engineering & Scientific Research, Vol. 1(3), pp. 57-61.
- Tyagi R. (2012), “Wind energy and role of effecting parameters”, European Journal of Applied Engineering & Scientific Research, Vol. 1(3), pp.73-83.
- Tyagi R. (2012), “Hydraulic turbine and effect of different parameters on output power”, European Journal of Applied Engineering & Scientific Research, Vol. 1(4), pp. 179-184.
- Tyagi R. , Verma M. and Borah S. (2012), “Dynamic analysis of a shaper machine cutting tool and crank pin”, Journal of Environmental Science, Computer Science & Engineering Technology, Vol. 1(3), pp. 372-380.
- Nandan G., Sahoo P. K., Kumar R., Chatterjee B., Mukhopadhyay D., Lele H. G. (2012), “Study of Ballooning of a Completely Voided Pressure Tube of Indian PHWR Under Heatup Condition”, Nuclear Engineering and Design, 243, pp. 301–310.
- M, Singh. O (2012), “Thermodynamic Evaluation of WHRB for its Optimum performance in Combined Cycle Power Plants”, IOSR Journal of Engineering, Vol. 2(1), pp.11-19.
- Ehtesham Nazma, Suhaib Mohd, (2012),"Tendon driven robotic hands: A review," International Journal of Mechanical Engineering and Robotics Research, Vol.1 (3), pp. 350-357.
- Shukla, R. K., Dixit, G., and Agarwal, A. (2012), “Modelling Barriers in Supply Chain Coordination”, International Journal of Management Science and Engineering Management, 7(1), pp.68-78.
- Sikarwar B. S., Battoo N. K., Khandekar S. and Muralidhar K. (2011), “Dropwise condensation underneath chemically textured surfaces: simulation and experiments”, ASME Journal of Heat Transfer, Vol. 133(2), pp. 021501 (1-15).
- Shukla, R. K., Dixit, G., and Agarwal, A. (2011), “Study of Select Issues related to Supply Chain Coordination: Using SAP-LAP analysis framework”, Global Journal of Enterprise Information System, Vol. 3(2), pp. 69-82.
- Shukla, R. K., Dixit, G., and Agarwal, A. (2011), “Understanding of Supply Chain: A Literature Review”, International Journal of Engineering Science and Technology, Vol. 3(3), pp. 2059-2072.
- Tyagi R. K., Srivastava K. K, Pandey R. S., (2011), “Analysis of electrostatic ion-cyclotron instability driven by parallel flow velocity shear”, Surface Engineering and Applied Electrochemistry, Vol. 47 (4). pp. 150-159.
- Tyagi R. K, Srivastava K. K., (2011), “Analytical and experimental study of velocity shear instability in the presence of inhomogeneous perpendicular DC electric field”, Journal of Engineering and Technology Research, Vol. 3 (4), pp. 118-126.
- Tyagi R. K, Pandey R. S., (2011), “Effect of electric and magnetic field on metal cutting by velocity shear instability”, Journal of Emerging Trends in Engineering and Applied Sciences, Vol. 2 (4), pp. 693-697.
- Pandey N. K., Tyagi R. K. (2010), “Effect of Velocity Shear Instability on Diesel engine ignition delay Computer Aided Design Tools to Aesthetic Design”, Global Journal of Enterprise Information System, Vol. 2 (1), pp. 46-49.
- BVK Tyagi R.K., Pandey N. (2010), “An Erosive Wear model to predict erosion in metals for multi-particle impact at normal incidence”, Journal of Mechanical Engineering, Vol. 1 (2), pp. 73-79.