Faculty

Examination Passed Board/University Year C.G.P.A./Percentage Subjects Taken
Ph.D (Engg.) I.I.Sc (Bangalore) 1993 Degree Awarded One Dimensional Combustion Acoustics
M.E. (Aerospace) I.I.Sc (Bangalore) Jan 1988 6.3/8.0 Aerospace Engg.
B.E. (Aerospace) Punjab Univ. 1985 74% Aeronautical Engg.
B.Sc Gharwal Univ. 1980 74% Physics, Chemistry & Math’s

Industrial Experience
One Year Industrial Experience In Hindustan Aeronautics Ltd., Bangalore (Indian Govt. Undertaking For Manufacturing And Development Of Aircrafts) As Assistant Aero Engineer From August 1985 To August 1986. During My Stay At Hal, I Did Work On Design Of Light Advanced Helicopter.
Research Experience :
? One-Year Research Work On “One Dimensional Tube Acoustics” In Jatp (Joint Advance Technology Program) Of I.I.Sc, Bangalore As Project Associate From July 1993 To May 1994.
? Six Month Research Work On “Determination Of Unsteady Forces For An Underwater Missile Technology” Taking Added Mass Into Consideration In The Department Of Mechanical Engineering Of I.I.Sc, Bangalore As Project Associate From June 1994 To Sept 1994. During This Period, I Was Also Involved In Designing Of Honey Comb And Screens For Water Tunnel.
? Personal Research On Different Topics During Teaching At Various Levels In Various Colleges And Universities As Elaborated Below.

Teaching Experience :
? One And Half Year Teaching Experience In Kalptaru Institute Of Technology, Tiptur. Karnataka (India) As Assistant Professor Of Mechanical Engineering From September 1994 To Feb 1996.

In Feb 1996, I Left Teaching Job To Prepare For Interview Of Govt. Service In Indian
Space Research Organization. I Appeared For Interview And Got Selected For The
Post Of Scientist/Engineer D In Liquid Propulsion System Center Situated At
Valiamal, Thiruvananthapuram, Kerala (India)
I Had To Join The Aforesaid Position On Or Before 2-9-1996 But Due To Allergic Problem In South India, I Requested Them To Change My Place Of Work And Asked For Three Months Extension To Join But They Rejected My Request For Change Of Work Place. Afterward, I Went To My Native (Dehradun) And Started Teaching In Private Colleges.
? Two Years Teaching In “National Institute Of Aeronautical Engineering And Indira Gandhi Memorial Institute Of Engineering And Technology In Dehradun During June 1997 To July 1999.
? Five Years Teaching Experience In Dehradun Institute Of Technology Dehradun Recognized By Aicte (All India Council For Technical Education) And Affiliated To Uptu (Lucknow) (Uttar Pradesh Technical University). From September 1999 To October 2004. Out Of Five Years, Three Years I Worked As Professor Of Mechanical Engineering Holding Position Of Head Of The Department.
? Six Months Teaching Experience As Professor And H.O.D., Mechanical Engg. Deptt. Of Krishna Institute Of Engg. & Tech. (Kiet) Murad Nagar, Ghaziabad (U.P.).From August2006 To Feb.2007.
? Worked As Principal Of Laxmi Devi Institute Of Engg. & Tech. (Liet) Alwar (Raj.) From Feb.2007 To April 2007
? Served As Prof. And Director Of Aryabhatt College Of Engg. And Tech. Baghpat, From August 2007 To May 2008.
? Served As Director In Neelkanth Institute Of Technology, Modipuram, Meerut From August 2008 Tofeb.2010, Courses Offered By Institute Were B.Tech. Diploma, Bba&Bca
? Served As Director In Gbit Meerut, From Feb 2010 To Sept.2010.
? Served As Director Of Iimt, Iet, Meerut From Sept2010.To Feb.2014.Courses Offered By Institute Were B.Tech., Polytechnic & Mba.
? Served As Hod, Mechanical Engg. And Officiating Director Of Bit Meerut From Feb.2014 To July 2014.
• Served As Director Of Gyan Sagar College Of Engg, Sagar. From August 2014 To Sept.2015. Courses Offered By The College Were B.E. & Polytechnic.
• Note: During My Stay At Gsce Sagar, I Conducted An Aptitute Test For Higher Studies For Collection Of Students’data For Admission Purpose. This Was Conducted For Four Districts And Data Of 4000 Students Was Collected.
• Served As Director Of Dvsit Meerut From Sept.2015 To Nov.2016
• I Taught Thermodynamics In Odd Semester And Got 100% Result. In Last Year Even Semester. I Taught Applied Thermodynamics And Applied Thermodynamics In Ug Program. I Also Taught Gas Turbine Theory In Pg Program.
• Served As Associate Prof. Of Thermal And Aerospace Engg. Adama Science And Technology University, Adama, Ethiopia From 15 Nov. 2016 To 31july 2018. I Taught Fluid Mechanics 1&2, Power Plant Engg. For Ug And Multi Phase Flow For Pg Program In First Year. In Second Year First Semester, I Taught Fundamental Of Thermodynamics Technology,
• I Joined As A Joint Dean Of College Of Engg. And Technology, College Of Polytechnic, College Of Sciences In Iimt University, Meerut, On 31aug.2018 And Left On 2 Jan.2019
• Presently I Am Working As Prof.& Head Of Aerospace Engg. Amity University Gurugram Since 11june 2019. I Taught Fluid Mechanics And Aerodynamics 2 In The Odd Semester, In Even Semester I Taught Propulsion 1, Aircraft Structure- 1 And Aerodynamics-1.I Also Taught Themodynamics, Aerodynamics-2 And Propulsion-2 And Turbo Machines. I Took Classes Of M.Tech Defence And Taught Advanced Engg Mathematics And Aerospaces Propulsion. I Also Taught Theory Of Flight. I Am Teaching Fuel And Combustion Also In This Semester.
Overseas Teaching Ecperience :
o Four Years Teaching Experience As Professor Of Design And Drafting Technology In Adama University, Nazareth Ethiopia Under Undp (United Nation Development Program) From Oct 2004 To July 2006 And From Nov. 2016 July 2018 Respectively

Fuel And Combustion (ASE 2422)
Low Speed Aerodynamics (ASE 2415)
Aerospace Propulsion (ASE 2416)
Aircraft Structure (ASE 2417)

Aerodynamics, Propulsion, Heat Transfer, Combustion, Cfd And Acoustics

Subjects Related To Aerospace

• Singh L.K, Rajashekar C., Gupta S.B., Sheshadri T.S. And Jain V.K.: Heat Transfer Performance Of Coal Burning Rijke Combustor, Int. Of Energy Research 14(1990) 756 • Gupta S.B., Sheshadri T.S. And Jain V.K.: One Dimensional Combustion Excited Acoustics:, “Acoustics Letter” Vol. 14 No. 3, (1990) Pp 46-47 • Gupta S.B., Sheshadri T.S. And Jain V.K.: Frequency Of Rijke Tube Combusters”, “Acoustics Letter” Vol. 15 No. 5 (1991) Pp. Int. Journal Of Energy Research. • Gupta S.B., Sheshadri T.S. And Jain V.K.: “Acoustics Energy Measurements In A Coal Burning Rijke Combustor”, International Journal Of Energy Research.,Vol17, 217-220(1993) • Gupta S.B., Sheshadri T.S., Gupta S.B., Sheshadri T.S. And Jain V.K.: “Combustion Excited Tube Acoustics”, “Acoustica”, Vol 76(19922) Pp101-103.(1991) • Gupta S.B., Sheshadri T.S. And Jain V.K.: A High Performance Oscillatory Combustor Burning Low Grade Coal”, International Journal Of Energy Research.Vol17,775-778,(1993) • Gupta S.B.: “Theoretical Determination Of Optimum Electrode Travel Speed/ Overlapping Length Of Molten Metal Drops In Welding” Proceeding Of Summer Research Seminar, June 2005 ,Nazareth Ethiopia,. • Surendra Singh,S.B. Gupta.,: Energy Saving In Biscuit Industry, International Journal Of Engineering Research, Volume No. 3 Issue Special 3, Pp 2347-5013,27 June 2014. • Surendra Singh,S.B. Gupta.,Abhay Kumar Sharma,: Energy Conversion Analysis In Biscuit Industry, International Journal Of Advanceed Engineering Research And Technology Conference Proceeding, Pp 66-72,30 August 2014. • Shilpi Bansal, S.B.Gupta, Environmental Ethics And Human Values, Definitions And Theories, Two Days International Conference On Value Education For Ethics And Global Peace, April 29-30 2016,Pp 413-423. • Shobhit Sharma,S B Gupta, “Appearance Actions For Four Cylinder Diesel Engine By Employing Algebra Of Logics, International Journal Of Education And Science Research,Vol.-3,Issue- 6,Pp 75-79, Dec. 2016. • Gupta S.B.: “Theoretical Determination Of Optimum Electrode Travel Speed/ Overlapping Length Of Molten Metal Drops In Welding Using Concept Of Shrinkage Of Metal Drops” International Journal Of Advance & Innovative Research Volume 5, Issue 3 ( July - September 2018 ). • Sharma Shobhit, Gupta S.B.: “ Determination Of Rijke Tube Upper End Impedance Using Experimental Values Of Lower End Impedance, Ijmte Journal,Vol Ix, Issue Ii, Feb. 2019. • Sharma Shobhit, Gupta S.B.: “ Determination Of Position Of Pressure Antinodes Inside The Rijke Tube, Ijmte Journal, Vol. Ix, Issue Iv , April 2019. • Gupta S.B.,Comparison Of The Effect Of First Order And Second Order Fluctuating Temperature Field On Convective Heat Transfer Coefficient In A Unsteady Laminar Boundary Layer Published In 3rd International Conference Organized By Srm Chennai In Last Week Of Feb. 2020. • Prakhar Jindhal, Gupta,S.B., Burn Rate Optimization Of Potassium Nitrate Based Propellant, Test Engineering And Management,Vol.,83, May/June 2020 (Scopus) Issn/Isbn No. 0193-4120 • Gupta,S.B.,Prakhar Jindhal. Mathematical Approach For Determining The Critical Thickness Of Insulation For Pipe Bends, (Scopus) Issn/Isbn No. 2005- 4238 29,11c,(2020) 188-195, • Gupta,S.B, Chalia Sonia A Review On Application Of Acoustic Interaction With Heat Transfer And Combustion Processes, National Conference Amiet, Amity Uni, Haryana,15th September 2020 • A Review On Evolution Of Airfoils And Their Characteristics In Last Three Centuries. Part-1: Evolution Of Flights And Shapes Of Wing Sections Before1930 And Naca Series, Presented In Icfst-Kiet Conference Held On 13th And 14th August 2021. It Is Published In American Institute Of Physics. • A Review On Evolution Of Airfoils And Their Characteristics In Last Three Centuries Part-2: Evolution Of Airfoils And Their Characteristics After 1930 And Naca Series With Characteristics Of Subsonic And High Subsonic Airfoils, Presented In Icfst-Kiet Conference Held On 13th And 14th August 2021. . It Is Published In American Institute Of Physics. • Performance Investigation Of A Dielectric Stacked Triple Material Cylindrical Gate All Around Mosfet (Dstmcgaa) For Low Power Applications Ecs Journal Of Solid State Science And Technology 2023-01-01 | Journal Article Doi: 10.1149/2162-8777/Acaeba Contributors: Neeraj Gupta; Rashmi Gupta; S. B. Gupta; Rekha Yadav; Prashant Kumar • Paper On,Effect Of First Order Fluctuating Temperature Field On Convective Heat Transfer Coefficient In A Unsteady Laminar Boundary Layer In A Circular Tube., Is Accepted For Publication And To Be Presented In The Conference To Be Held On 23rd June 2023, Organized By Rkgit,Gzb Paper To Be Submitted Acoustic Interaction Inside A Rijke Tube With Two Combustion Regions

S.No. Name Of The Funding Agency Program Title Year Of Funding Duration Amount Sanctioned Status Completed / On Going 1. Coal India Ltd. Development Of A High Performance Rijke Tube Based Coal Burning Oscillating Combustor 1998 5 Years 8 Lakh (Approx) Completed 2. Adama University Nazareth Ethiopia Development And Fabrication Of Economically Powered Multipurpose Automatic Lifting Machine 2006 1 Year 6,000 Birr On Going 3. Dst, Haryana A Novel Way Of Producing Clean Water Using Adiabatic Evaporation Process Fueled By Solar Energy And Utilization Of Residual Moist Air To Run A Household Cold Storage For Preserving Fruits And Vegetables -- 2.5 Years -- Submitted In August2022

Life Member of ISTE

Academic Assignment :
o Around Thirty Projects Of Final Year Mechanical Engineering Students Have Been Guided During 2002 To 2004.
o I Have Guided Four M.Tech / M.Sc Projects Also.
o “Development And Fabrication Of Automatic Powered Stand For Two Wheelers” Had Been Appreciated And Awarded By The Management And May Be Applied For Patent.
o In Adama University, Nazareth, Ethiopia, I Was Working On “Development And Fabrication Of Economically Powered Multipurpose Automatic Lifting Machine During 2004 To 2006.
o I Have Evaluated Three M. Sc. Thesis Also
Establishment Of Labs :
In Kalptaru Institute Of Technology, Tiptur. I Approved Installation Of Equipments And Test Rigs Of The Following Labs
o Strength Of Materials
o Applied Thermodynamics
o Refrigeration And Air-Conditioning
In D.I.T Dehradun, I Established All The Laboratories For Courses Of B.E. Level In Mechanical Engineering.
Development Of The Department :
o Approval For Inception Of M.Tech In Thermal Had Been Obtained From Aicte.
o Department Had Been Accredited By National Board Of Accreditation India.
o Duties Of Sports In Charge.
o Served As Controller Of Exam For One Years
o N.S.S Co-Ordinator
o Chief Co-Ordinator Of Entrepreneurship Development Cell
o Dean Of Student Welfare For One Year Duration
o Chief Proctor For One-Year Duration
o Conducted Many Entrance And Competition Exams.
Workshop And Conferences Attended :
o A Workshop On Emerging Technologies In Automobiles Is Attended In I.I.T Roorkee In Dec. 2000.
o A Conference On Vocational Training For Employment Generation Organized By Dst (Department Of Science And Technology) In Association With Undp Is Attended In Dec. At Trichi (India) In Dec. 2003
o A Workshop Organized By National Board Of Accreditation On Accreditation Of Engineering Institutes Is Attended In Graphic Era Institute Of Engineering And Technology In Nov. 2003
o Many More Workshops Attended At Various Levels.
o A Workshop On Intellectual Property Right Organized By Rajiv Gandhi Institute Of Engg And Tech. Bhopal (Mp) In 2015.
o A Workshop On National Board Of Accreditation Organized By Rajiv Gandhi Prodhyogic Viswavidhyalay Of Engg And Tech. Bhopal (Mp) In 2015.
o A Conference On Energy Efficient Development In Small And Medium Cities Organized By Ishrae In 2015 At Meerut.
o A Workshop On Renewable Energy Resources Organized By Iaa Meerut Chapter In Feb.2016.
Workshop Organized :
o A Workshop On “Auto Cad” For Four Days Was Organized In 2003 Conducted By Nittr Chandigarh (India)
o Organised Convocation 2015 In Gsce Sagar.
o Organised Alumni Meet 2016 In Dvsgoi Meerut.

A Certificate Of Merit In National Service Scheme (Sports)
Four Years National Merit Scholarship During B.Sc
Internship On Ansys During Summer For Six Weeks
Key Note Speaker Rkgit, Gzb, June 23
Paper Presentaion, Rkgit,Gzb,June 23
Seminar Delivered "Road Map Of The Journey Towards Excellence". Venue Is C-214 And Timings Are 10 Am To 10.4 Am. 20th Oct23
Seminar Attended On Emplyability Industry 4.1
In Amity University, I Am Involved In Naac Accreditation Also.
I Have Been Promoted To Hod, Aerospace On 16th May 2020
I Had Been A Speaker In Fdp Organized By Vidhya Knowledge Park, Meerut In Oct. 2018.
I Had Chair A Session Of 3rd International Conference Organized By Srm Chennai In Feb. 2020.
I Had Been A Keynote Speaker In Fdp Organized By Rkgit, Gzb In June 2023
I Chaired One Session Of International Conference Held At Shanti Institute Of Technology Meerut.
I Had Submitted The Following Proposals In Adama Science And Technology University, Adama, Ethiopia.
Study Of Vehicular Growth, Distance Covered And Emission Per Vehicle Per Day In Adama, Ethiopia. Cost 400,000 Birrs
Note : In Dvsgoi, Meerut, Pradhan Mantra Kaushal Vikas Yojna Has Been Incepted By Me.
S

Amity School of Engineering and Technology (ASET)
Amity University Haryana, Amity Education Valley, Pachgaon, Manesar, Gurgaon, Haryana 122413